Specifications

www.vtechphones.com
35
Additional information
Problem Suggestion
The charge/in use light
is ashing.
This is an indication that the battery is low, depleted, or that there is no electrical contact between
the battery and the base unit. Ensure the battery is securely plugged into the handset. Close
the battery compartment cover and place the handset in the base unit and let it charge until the
battery is fully charged (see page 5.)
Common cure for
electronic equipment.
If the unit does not seem to be responding normally, then try putting the handset in its base. If it
does not seem to respond, do the following (in the order listed):
1. Disconnect the power to the base.
2. Disconnect the handset battery, and spare battery, if applicable.
3. Wait a few minutes.
4. Connect power to the base.
5. Re-install the battery(ies).
6. Wait for the handset to re-establish its link with the base. To be safe, allow up to one minute
for this to take place.
Troubleshooting