User`s manual

9
Temporary ringer silencing
When the telephone is ringing, you can temporarily silence the ringer of the handset
without disconnecting the call. The next call rings normally at the preset volume.
Press OFF, MUTE or on the handset. displays and Ringer muted
displays briey.
Press /VOL on the telephone base.
Press MUTE on the headset.
Find handset
Use this feature to nd all system handsets and headset.
To start paging:
Press FIND HANDSET on the telephone base. All idle handsets ring and
display ** Paging **. The headset rings and blinks in blue.
To end paging:
Press FIND HANDSET again on the telephone base.
Press /HOME, , CANCEL or any dialing key on the handset.
Place the handset in the telephone base or charger.
Press on the headset.
Do not press and hold FIND HANDSET for more than four seconds. It may lead
to deregistration.
Redial list
Each handset stores the last 10 telephone numbers dialed.
To review and dial a number from the redial list:
Press REDIAL when the phone is not in use.
Press , oror REDIAL repeatedly until the desired entry displays.
Press /HOME, CELL 1 or CELL 2 to dial.
To delete a redial entry:
When the desired redial entry displays, press DELETE.
Join a call in progress
You can use up to four system handsets at a time. You can buy additional expansion
handsets (DS6071) for this telephone base. You can register up to twelve devices to
the telephone base, including a maximum of two cordless headsets.
When a handset is on a call, press /HOME or the corresponding CELL key
on another handset to join the call. Press OFF to exit the call. The call continues
until all devices hang up.
Press on the headset to join the call. Press again to exit the call. The callThe call
continues until all devices hang up.
Push-to-talk (PTT)
You can directly broadcast messages from one handset to the speakerphone of
one or multiple handsets.
To start a PTT communication:
Press PUSH TO TALK when the phone is not in use.
Scroll to a desired handset oror Group >> Press SELECT.
Only one handset can talk at a time.
Press and hold PUSH TO TALK while you are talking.
Release PUSH TO TALK to let the other party respond.
Intercom
Use the intercom feature for conversations between two handsets.
Press MENU on your handset when not in use.
Scroll to Intercom >> Press SELECT >> Scroll to the destination handset
number >> Press SELECT.
To answer the intercom call, press /HOME, CELL 1/ CELL 2, or any
dialing keys on the destination handset.
To end the intercom call, press OFF or place the handset back in the telephone
base or charger.
Answer an incoming call during an intercom call
If you receive an incoming call during an intercom call, there is an alert tone.
To answer a home call, press /HOME. The intercom call ends automatically.
To end the intercom call without answering the outside call, press OFF. The
intercom call ends and the telephone continues to ring.
To answer a cell call, press CELL 1/ CELL 2. The intercom call endshe intercom call ends
automatically.
•
•
•
•
•
•
•
•
1.
2.
3.
•
•
1.
2.
•
•
1.
2.
3.
4.
•
•
•