® LITTLE SMART first steps™plus USER'S MANUAL © VTECH Printed in China 91-01028-001
Dear Parent: At VTech® we know that children have the ability to do great things. That’s why all of our electronic learning products are uniquely designed to develop a child’s mind and allow them to learn to the best of their ability. Whether it’s learning about letters, numbers, geography or algebra, all VTech® learning products incorporate advanced technologies and extensive curriculum to encourage children of all ages to reach their potential.
INTRODUCTION Thank you for purchasing the VTECH® LITTLE SMART First Steps™ Plus learning toy! This product is one of a family of LITTLE SMART™ educational electronic learning products. We at VTECH® are committed to providing the best possible products to entertain and educate your child. Should you have any questions or concerns, please call our Consumer Services Department at 1-800-521-2010 in the U.S., 1-800267-7377 in Canada or 01235-546810 in the U.K.
INCLUDED IN THIS PACKAGE - One LITTLE SMART First Steps™ Plus learning toy. (Includes a main body walker with removable electronic activity board). - One instruction manual. WARNING: All packing materials, such as tape, plastic sheets, wire ties and tags are not part of this toy, and should be discarded for your child’s safety.
BATTERY INSTALLATION 1. Make sure the unit is Off. 2. Locate the battery cover on the back of the unit. Use a coin or screwdriver to loosen the screw. 3. Install 2 'AA' (UM-3/LR6) batteries, follow the diagram inside the battery box. (The use of new, alkaline batteries is recommended for maximum performance.) 4. Replace the battery cover and tighten the screw to secure the battery cover. BATTERY NOTICE • Install batteries correctly observing the polarity ( +, - ) signs to avoid leakage.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE BATTERIES. NOTE: If the electronic activity board suddenly stops working, the voice becomes faint or the sound seems weak, the problem may be low battery power. If this is the case, follow the steps below: 1. Turn the unit off for a moment, then back on. 2. Check to make sure the batteries are properly inserted. 3. Try inserting brand new batteries.
ASSEMBLY INSTRUCTIONS Converting folded walker into the upright position : 1. First, pull the release tabs inwards. Then, pull the metal rod upwards. 2. To position legs, rotate legs to an upright position.
3. Next, pull the legs toward you until the metal rod goes over the 2 large white locks and snaps into place. Pull back on legs to ensure they are securely locked. 4. Note: When the walker is in the upright position, the legs MUST be secured in the safety locks. Apply a small amount of downward pressure on the handle to check the safety lock.
HOW TO CONVERT TO A FLOOR ACTIVITY CENTER (FOLDED POSITION): 1. Press down on the 2 round safety lock release buttons at the same time. 2. Pull the metal rod towards you, while the safety lock release buttons are being pressed. This will unlock the metal rod from the safety locks, allowing the legs to fold into the desired position. 3. Holding the main body, fold the legs into the main body.
4. Press down on the legs until they snap into the locked position. 5. Pull up on metal rod to ensure legs are securely locked .
