User`s manual

28
Directories
28
1
^DIR
DIRECTORY
2
^DIR
ADAM
5551234
3
SELECT
SPEED EDIT ERASE
5551234
^DIR
SPEED EDIT ERASE
5551234
^DIR
SPEED EDIT ERASE
5551234
To copy, edit or delete an entry
You can make existing directory entries Speed Dial entries
if they are stored in the handset. You can also change
names, numbers and the distinctive ringing settings, or erase
entries, that are stored in the cordless handset or the tele-
phone base. When any entry is displayed, press
SELECT
to see the options. Press CIDV or ^DIR to highlight the
option you want (blinking text), then press SELECT.
To make an entry a Speed Dial entry (cordless
handset only)
When SPEED is blinking, press SELECT, then dial a
memory location (1-9) to make this entry a Speed Dial
entry.
If you choose a memory location that is already
assigned to a different entry in the directory, that entry
will remain in the directory, but will not have a SPEED
DIAL location.
To edit an entry
Press CIDV or ^DIR until EDIT is blinking, then press
SELECT. You can change the name and number (or dis-
tinct ring
setting on the cordless handset) by following the steps
described on pages 25-26.
To delete an entry
Press CIDV or ^DIR until ERASE is blinking, then press
SELECT to display a confirmation screen ( ERASE NO
YES ).
To delete the entry, press ^DIR to highlight YES , then
press SELECT.
To abort the procedure and leave the entry intact, press
CID CIDV to highlight NO, then press SELECT.
Press SELECT to
choose blinking option
on the handset.
NOTE: Screens shown
above are displayed on the cord-
less handset. The telephone base
display is slightly different, but the
procedure is the same.
NOTE: See Page 27 for
instructions on dialing a directory
entry from the base.