User`s manual

Telephone Operation

Base settings

You can change settings to program how the telephone

base works.

Follow the steps below to program the telephone base.

To stop at any time, press

CLEAR. If the phone rings, pro-

gramming stops automatically so you can answer the call.

Choose telephone base language

At this menu you can select the language used in all

menus and screen displays.

• Press MENU to begin programming.

• Press CIDV or DIR^until screen displays

LANGUAGE

• Press SELECT to change current setting.

• Press CIDV or DIR^ to scroll through the available

options of ENGLISH, ESPANOL and FRANCAIS.

• Press SELECT to select the displayed language and

exit.

Choose dial mode

At this menu you can choose tone or pulse dialing. The

factory default setting is TONE. Change this to PULSE

only if you do not have touch-tone dialing service.

• Press MENU to begin programming.

• Press CIDV or DIR^ until screen displays

DIAL

MODE

& setting.

• Press SELECT to change current setting.

• Press CIDV or DIR^ to display TONE or PULSE.

• Press SELECT to select displayed dial mode and exit.

DIAL MODE: TONE

LANGUAGE

NOTE: This sets the dial mode

for both the handset(s) and the tele-

phone base.

NOTE: During a power failure,

only the corded handset can be used

to make and answer calls. The dial

mode will default to pulse dial. To

change to tone dial temporarily, press

* on the telephone base (see page

17). When the power is restored, the

dial mode will return to the pro-

grammed setting.