User’s manual E2913B/E1113B 2.
Congratulations on purchasing your new AT&T product. Before using this AT&T product, please read the Important safety instructions on pages 55-57 of this manual. Please thoroughly read the user’s manual for all the feature operation and troubleshooting information you need to install and operate your new AT&T product. You can also visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada dial 1 (866) 288-4268. Model #: E2913B/E1113B Product name: 2.
You must install and charge the battery before using the telephone. STOP! See page 7 for easy instructions. For customer service or product information, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada dial 1 (866) 288-4268.
User's manual E2913B/E1113B 2.4 GHz cordless telephone/ answering system with caller ID/call waiting FLASH CLEAR TONE MUTE REDIAL DELETE PAUSE INT Table of contents Getting started Answering system operation Quick reference guide.......................2 Parts checklist.......................................4 Telephone base installation............5 Battery installation & charging.............7 Installation options.............................8 Belt clip & optional headset.............
Getting started Quick reference guide Cordless handset MENU������� /������ SELECT CID/-VOLUME Press to display the menu. Once in the menu, press to select an item or save an entry or setting. Press to scroll down while in menus. Press to display caller ID information (page 34). While entering names or numbers, press to move the cursor to the left (page 27). Press to decrease the listening volume while on a call (page ���������� 14)�. DIR Press to scroll up while in menus.
Getting started Quick reference guide Telephone base CHARGE/IN USE • Flashes when another telephone on the same line or one of the handsets is in use. • Flashes when the answering system is answering an incoming call. • Flashes while an incoming call is ringing. • On steady when the handset is properly positioned to charge in the telephone base. HANDSET LOCATOR Press to make handsets beep (page 13). SETUP ANNC Press to review or change answering system options (page 38).
Getting started Parts checklist Save your sales receipt and original packaging in case it is necessary to ship your telephone for warranty service. Check to make sure the telephone package includes the following: User’s manual Quick start guide E2913B/E1113B 2.4 GHz Cordless Telephone/ Answering System with caller ID/call waiting E2913B/E1113B 2.
Getting started Telephone base installation Choose a central location close to a telephone jack and an electrical outlet not connected to a wall switch. The telephone base can be placed on a flat surface or mounted on a standard wall plate. For optimum range and better reception, place the telephone base in a high and open location.
Getting started Telephone base installation 1. Plug one end of the telephone line cord into the telephone jack at the bottom of the telephone base. 2. Plug the small end of the power adapter into the power jack at the bottom of the telephone base. 5 4 3. Route cords through slots. Telephone line cord 4. Plug the large end of the power adapter into an electrical outlet not controlled by a wall switch. DSL filter (Optional for DSL users, see number four in the note section below.) 5.
Getting started Battery installation & charging After installing the battery, you may be able to make and receive short calls. For best performance, place the handsets in the telephone base or the charger and charge for 16 hours before use. You can keep the battery charged by returning the handsets to the telephone base or the charger after use. When the battery is fully depleted, a recharge takes about 12 hours.
Getting started Installation options NOTE: The mounting bracket must be used for both tabletop use and wall mounting positions. Tabletop mount Wall mount Telephone outlet mounting plate with mounting studs Wall mounting The telephone base comes with the bracket mounted for tabletop use. If wall mounting is desired, a telephone outlet wall mounting plate with mounting studs is required.
Getting started Installation options 3. To attach the bracket for wall mounting, insert the tabs of the bracket into slots and on the telephone base, then press the other bracket tabs into slots and as shown on the right. 4. Plug the power adapter into an electrical outlet not controlled by a wall switch. Plug the telephone line cord into a telephone wall jack. To mount the telephone on the wall, position the mounting holes and over the telephone outlet mounting studs.
Getting started Belt clip & optional headset Install belt clip as shown below if desired. Snap belt clip into the notches on both sides of handset. To release belt clip from handset, lift one side of the belt clip out of the notch. For hands-free telephone conversations, use any industry standard 2.5 mm headset (purchased separately). For best results, use an AT&T 2.5 mm headset. To order an AT&T 2.5 mm headset, visit our website at www.telephones.att.com or call 1 (800) 222-3111.
Telephone operation Elapsed time PHONE 00:00:30 Basic operation Making and answering calls To answer an incoming call, press PHONE/FLASH, SPEAKER or any dial pad key (0-9, * or #) on the handset. To make a call, press PHONE/FLASH or SPEAKER then dial a number. Press OFF/CLEAR or place the handset in the telephone base or charger to hang up. TONE MUTE REDIAL DELETE PAUSE PREDIAL To predial (preview numbers before dialing), enter numbers first.
Telephone operation Basic operation REDIAL 555-1234 RINGER MUTE Last number redial Press REDIAL/PAUSE to display the most recently called numbers (up to 32 digits). Press CID/-VOLUME, DIR /VOLUME+ or REDIAL/PAUSE repeatedly to view up to five recently called numbers. The handset beeps twice at the beginning or end of the list. Press OFF/CLEAR to exit. Press SPEAKER or PHONE/FLASH to redial any displayed number.
Telephone operation Basic operation Handset locator If the handsets are misplaced, press HANDSET LOCATOR on the telephone base. The handsets will play a paging tone for 60 seconds to help you locate them. To stop the paging tone, press PHONE/FLASH, SPEAKER, or any dial pad key (0-9, *, or #) on the handsets, or press HANDSET LOCATOR on the telephone base. NOTES: 1. If the handset ringer is set to off (0), the hanset locator feature is not avaible on that handset (page 24). 2.
Telephone operation Options while on calls Volume control Press CID/-VOLUME to decrease the volume. Press DIR /VOLUME+ to increase the volume. When changing the volume level, the new setting is saved. NOTE: The earpiece, hands-free speakerphone and headset listening volume are adjusted separately.
Telephone operation Options while on calls Mute Press MUTE/DELETE to silence the microphone. When mute is on, will show on the handset screen. You will be able to hear the caller, but your caller will not be able to hear you until you press MUTE/DELETE again and resume speaking. When mute is turned off, MICROPHONE ON will show temporarily on the handset screen. Mute is automatically cancelled when you end a call.
Telephone operation Intercom TONE TONE MUTE REDIAL MUTE REDIAL DELETE PAUSE DELETE PAUSE HANDSET 1 12:45PM Use the intercom feature for conversations between handsets. 1. Press INT. The screen of the originating handset will show INTERCOM TO:. 2. Enter the handset number of the destination handset (1, 2 or 3). The display will show CALLING HANDSET X. The destination handset will ring, and its screen will show HANDSET X IS CALLING.
Telephone operation Intercom call transfer Use the intercom feature to transfer an external call from one handset to another. TONE TONE MUTE REDIAL MUTE REDIAL DELETE PAUSE DELETE PAUSE PHONE 00:05:30 TRANSFER TO: INTERCOM 1. During a conversation with an external call, press INT. The external call is automatically placed on hold. The originating handset’s screen will show TRANSFER TO:. 2. Enter the handset number of the destination handset (1, 2 or 3). The display will show CALLING HANDSET X.
Telephone operation Settings DIRECTORY TONE MUTE REDIAL DELETE PAUSE SETTINGS In the SETTINGS menu, you can change the language, dial type, and clock setting. You can also clear the voice mail indication. 1. Press MENU/SELECT in idle mode to enter the feature menu. 2. Press CID/-VOLUME to highlight SETTINGS, then press MENU/SELECT to enter the SETTINGS menu. 3. Press CID/-VOLUME or DIR /VOLUME+ to scroll through the SETTINGS menu, then press MENU/SELECT to select the desired option.
Telephone operation Settings Clock setting DIRECTORY SETTINGS SETTINGS LANGUAGE DIAL TYPE CLOCK SETTING CLOCK SETTING 12:00AM CLOCK SETTING 06:00AM CLOCK SETTING 06:45AM If you subscribe to caller ID service provided by your local telephone company, the time will automatically be set by an incoming call. In this menu, you can choose to set the time displayed on the handset screen. To cancel an operation, back up to the previous menu, or exit the menu display press OFF/CLEAR.
Telephone operation Settings Clear voice mail indication DIRECTORY SETTINGS SETTING DIAL TYPE CLOCK SETTING CLR VOICE MAIL CLR VOICE MAIL TURN INDICATOR OFF? If you subscribe to voice mail services provided by your local telephone company, NEW VOICE MAIL and the icon will appear on all handset screens when you have new voice mail. To cancel an operation, back up to the previous menu, or exit the menu display press OFF/CLEAR. To return to the idle mode press and hold OFF/CLEAR.
Telephone operation Sounds In the SOUNDS menu, you can choose one of ten ringer melodies, and turn the key tone on or off. DIRECTORY SOUNDS To cancel an operation, back up to the previous menu, or exit the menu display press OFF/CLEAR. To return to the idle mode press and hold OFF/CLEAR. Ringer melody To choose a ringer melody: SOUNDS RINGER MELODY KEY TONE RINGER MELODY MELODY 0 MELODY 1 MELODY 2 1. Press MENU/SELECT in idle mode to enter the feature menu. 2.
Telephone operation Display In the DISPLAY menu, you can select an image to be displayed as wallpaper. You can also adjust the contrast and brightness to one of five levels to suit different lighting conditions. To cancel an operation, back up to the previous menu, or exit the menu display press OFF/CLEAR. To return to the idle mode press and hold OFF/CLEAR. DIRECTORY Wallpaper To choose a wallpaper for the handset: DISPLAY 1. Press MENU/SELECT in idle mode to enter the feature menu. 2.
Telephone operation Display DIRECTORY DISPLAY To cancel an operation, back up to the previous menu, or exit the menu display press OFF/CLEAR. To return to the idle mode press and hold OFF/CLEAR. Brightness To adjust the screen brightness on the handset: 1. Press MENU/SELECT to enter the feature menu. DISPLAY WALLPAPER CONTRAST BRIGHTNESS BRIGHTNESS 2. Press CID/-VOLUME or DIR /VOLUME+ to scroll to DISPLAY, then press MENU/SELECT to enter the DISPLAY menu. 3.
Telephone operation Ringer volume DIRECTORY RINGER VOLUME RINGER VOLUME In this menu, you can set the ringer volume level (1-6), or turn the ringer off (0). When the ringer is turned off, the will appear on the handset screen. The ringer volume level also determines the ringer volume for intercom calls (page 16) and the paging tone when initiating the handset locator feature (page 13). If the ringer volume level is set to off (0) on a handset, that handset is silenced for all incoming calls and paging.
Directory Directory DIRECTORY Pat Williams 555-1234 Shared directory The directory is stored in the telephone base, and is shared by all handsets. Changes made to the directory on any one handset will be applied to all. NOTE: Only one handset can review the directory or caller ID log at a time. If another handset attempts to enter the directory, it will display NOT AVAILABLE AT THIS TIME. TONE MUTE REDIAL DELETE PAUSE Memory capacity The directory can store up to 50 entries.
Directory New directory entries DIRECTORY To cancel an operation, back up to the previous menu, or exit the menu display press OFF/CLEAR. To return to the idle mode press and hold OFF/CLEAR. To create and store a new directory entry DIRECTORY REVIEW STORE DIRECTORY ENTER NUMBER 555-1234 1. Press MENU/SELECT in idle mode to enter the feature menu. 2. Press MENU/SELECT again to enter the DIRECTORY menu. 3. Press 4. Press CID/-VOLUME to highlight STORE. MENU/SELECT. 5.
Directory New directory entries DIRECTORY ENTER NAME Pat Williams 7. Enter the name when prompted. • Use the dial pad to enter a name (up to 16 characters). Each time a key is pressed, the character on that key will be displayed. Additional key presses will produce other characters on that key. See the chart below. – Press CID/-VOLUME or DIR /VOLUME+ to move the cursor to the left or right. NOTE: The handset will automatically capitalize the first letter of every word.
Directory Directory search To cancel an operation, back up to the previous menu, or exit the menu display press OFF/CLEAR. To return to the idle mode press and hold OFF/CLEAR. To browse through the directory DIRECTORY Andrew 555-6789 1. Press DIR in idle mode to display the first listing in the directory. DIRECTORY EMPTY will be displayed if there are no directory entries.
Directory Directory search To cancel an operation, back up to the previous menu, or exit the menu display press OFF/CLEAR. To return to the idle mode press and hold OFF/CLEAR. To search by name 1. Press DIR in idle mode to display the first listing in the directory. DIRECTORY EMPTY will be displayed if there are no directory entries. 2. When a name entry is displayed, press a dial pad keys (2-9) to start a quick name search.
Directory To dial, delete or change entries To dial, delete or change a directory entry (name and number), the entry must be displayed on the handset. Use directory search (pages 28-29) to display an entry. To exit the directory press OFF/CLEAR. To dial a displayed number When a directory entry is displayed, press PHONE/FLASH or SPEAKER to dial the displayed number. To delete an entry When a directory entry is displayed, press MUTE/DELETE to delete the displayed entry from the directory.
Caller ID operation Caller ID operation Information about caller ID with call waiting CHRISTINE SMITH 908-555-0100 NOV23 10:01AM This product has a caller ID function with call waiting feature which works with service from your local telephone company. Caller ID with call waiting lets you see the name and telephone number of the caller before answering the telephone, even while on another call. TONE MUTE REDIAL DELETE PAUSE It may be necessary to change your telephone service to use this feature.
Caller ID operation Caller ID operation Shared caller ID log CHRISTINE SMITH 908-555-0100 NOV23 ����������� 10:01AM The caller ID log is stored in the telephone base, and is shared by all handsets. Changes made on any handset will apply to all. NOTE: Only one handset can review the directory or caller ID log at a time. If the other handset attempts to enter the call log, its screen will display NOT AVAILABLE AT THIS TIME.
Caller ID operation Caller ID operation Memory match Chris 908-555-0100 NOV23 10:01AM Names of callers will be displayed only if the information is provided by your local telephone company. If the telephone number of the caller exactly matches a telephone number in your directory, the name that appears on the screen will match the corresponding name already in the directory.
Caller ID operation HANDSET 1 4 MISSED CALLS 4:30 PM CID CALL LOGNEW Pat Williams 555-1234 NOV 23 10:31AM CALL LOGNEW Jeffrey Adams 555-9876 NOV 23 10:21AM To review the call log To review the call log Press CID/-VOLUME to review the call log. The call log displays the caller ID entries in reverse chronological order. The most recent call is displayed first. Press CID/-VOLUME or DIR /VOLUME+ to scroll through the list as shown at left. Press OFF/ CLEAR to return to the idle screen.
Answering system operation Answering system operation Message capacity Message counter Number of messages (or during playback, message number currently playing) The answering system can record up to 99 messages depending on the length of each message. Individual messages can be up to four minutes long, and total maximum recording time is 14 minutes. Messages will remain available for replay until you delete them.
Answering system operation Day & time announcements To set day and time Before playing each message, the answering system announces the day and time when the message was received. 1. CLOCK The system will announce the current clock setting, then announces "To set the clock, press CLOCK." 2. CLOCK The system will announce the current year setting, then announces “To change the year, press SKIP or REPEAT, to change the hour, press CLOCK.” 3.
Answering system operation Outgoing announcements Elapsed recording time (seconds). The outgoing announcement is the message callers hear when calls are answered by the answering system. Press to stop recording. The telephone is factory set with an announcement. If the telephone is set up to record messages, it answers calls with “Hello. Please leave a message after the tone.” You can use this announcement, or replace it with a recording of your own voice. 1.
Answering system operation Changing feature options 1. 2. You can change how the answering system operates. Press SETUP repeatedly to hear each feature. When you hear the feature you want to modify press SKIP or REPEAT to change the setting. Press SETUP to set selection and move to next menu option, or press PLAY/STOP to exit. SETUP until desired feature is heard (see list at right). SKIP or REPEAT until desired selection is heard. 3. SETUP to set selection and move to next menu option.
Answering system operation Number of messages (or during playback, message number currently playing). Message playback Press PLAY/STOP to hear messages. The system announces the number of messages, then begins playback. If you have new messages waiting, you will hear only the new messages (oldest first). If there are no new messages, the system will play back all messages (oldest first). Press PLAY/STOP to begin or end message playback. 1.
Answering system operation Recording & playing memos Elapsed recording time (seconds). 1. Press to stop recording. To record a memo RECORD “Record after the tone. Press STOP when you are done.” 2. Memos are messages you record yourself. They are saved, played back and deleted exactly like incoming messages. You can record a memo as a reminder to yourself, or leave a message for someone else if other members of your household are using the answering system. Speak into microphone. Press RECORD.
Answering system operation Message counter Message counter displays The message counter usually displays the total number of memos and incoming messages. See the list below for explanations of other displays in this counter. Message counter displays 0 No messages. 0 (flashing) The clock needs to be set (page 36). 1-99 Total number of messages and memos, or message number currently playing. 1-99 (flashing) Total number of messages and memos.
Answering system operation Answering system mode The answering system’s default factory setting is ON in order to answer and record messages. You can turn the answering system off, but if you do so, the answering system will not answer calls or record incoming messages. 1. ANSWER ON until the system announces “Calls will not be answered.” 2. "Beep," The system has been turned off. - OR - 1. 2.
Answering system operation 1. Dial your telephone number from any touchtone telephone. 2. When system answers, enter two digit remote access code (19 unless you have changed it). 3. Enter remote commands (see list at right). Remote access A two digit security code is required to access your answering system from any touch-tone telephone. This code is 19 by default, see Changing feature options (page 38) to change it. Play all messages Play new messages 2 4.
Appendix Screen icons, indicator lights & tones Screen icons & alert tones Screen icons The handset is in use. The handset speakerphone is in use. A headset is plugged into the handset and is in use. Microphone is muted. HANDSET 1 6 MISSED CALLS There are new voicemail messages. 12:45PM Ringer off. Battery charging (animated display). Low battery (flashing); place handset in telephone base or charger to recharge.
Appendix Handset display screen messages Screen display messages TONE MUTE REDIAL DELETE PAUSE XX MISSED CALLS There are new calls in the caller ID log. ALREADY SAVED The telephone number you have entered is already stored in the directory. CALL LOG EMPTY You are accessing an empty call log. CALLING HANDSET X You have placed an intercom call to another handset. CALL TRANSFERRED An external call is transferred to the destination handset.
Appendix Handset display screen messages Screen display messages TONE MUTE REDIAL DELETE PAUSE NEW VOICE MAIL There are new voicemail messages. NO LINE There is no telephone line connected. NOT AVAILABLE AT THIS TIME Someone else is already using the directory or call log which you are trying to access. NO SIGNAL, CALL ENDED During a call, the handset is no longer connected with the telephone base. Try moving it closer to the telephone base.
Appendix Troubleshooting If you have difficulty with your telephone, please try the suggestions below. For Customer Service, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada dial 1 (866) 288-4268. My telephone does not work at all. • Make sure the battery is installed and charged correctly (page 7). For optimum daily performance, return the cordless handset to the telephone base after use.
Appendix Troubleshooting I cannot dial out. • First, try all the above suggestions. • Make sure there is a dial tone before dialing. It is normal if the cordless handset takes a second or two to synchronize with the telephone before producing a dial tone. Wait an extra second before dialing. • Check that all the telephones connected to the same telephone line are hung up. • Makes sure the telephone is set to the correct dial mode (pulse dial or tone dial) for the service in your area.
Appendix Troubleshooting • It may be necessary to purchase a new battery. Please refer to the Battery installation & charging section of this user's manual (page 7). • The telephone might be malfunctioning. Please refer to the Limited warranty section of this user’s manual (page 61) for further instruction. The CHARGE light is off. • Clean the metallic charging contacts on the cordless handsets each month using a pencil eraser or a dry non-abrasive fabric.
Appendix Troubleshooting • Other electronic products can cause interference to your cordless telephone. Try installing your telephone as far away as possible from the following electronic devices: wireless routers, radios, radio towers, pager towers, cellular telephones, digital telephones, intercoms, room monitors, televisions, VCRs, personal computers, kitchen appliances, and other cordless telephones.
Appendix Troubleshooting • Other electronic products can cause interference with your cordless telephone. Try installing your telephone as far away from these types of electronic devices as possible. These devices include: routers, radios, radio towers, pager towers, cell phones, intercoms, room monitors, televisions, personal computers, kitchen appliances and cordless telephones. There is noise or interference during a telephone conversation. • The handset may be out of range.
Appendix Troubleshooting • Disconnect the telephone base from the modular jack and plug in a corded telephone. If calls are still not clear, the problem is probably in the wiring or local service. Contact your local service company (charges may apply). • Other cordless telephones and 802.11 wireless routers that are used for home computer networks both use internal radios to communicate. The radios may interfere with one another.
Appendix Troubleshooting The system does not receive caller ID or the system does not display caller ID during call waiting. • Make sure you subscribe to caller ID with call waiting features services provided by the local telephone company. • The caller may not be calling from an area which supports caller ID. • Both you and the caller’s telephone companies must use equipment which are compatible with caller ID service.
Appendix Troubleshooting The announcement message is not clear. • When recording the announcement, make sure you speak in a normal tone of voice about nine inches from the telephone base. • Make sure there is no background noise (television, music, traffic, etc.) when recording. The answering • Make sure the answering system is on. system does not • If the memory is full, the system will answer after ten rings record message. and announce “Memory is full. Enter remote access code.
Appendix Important safety instructions This symbol is to alert you to important operating or servicing instructions that may appear in this user’s manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock. Safety information • Read and understand all instructions in the user’s manual. Observe all markings on the product. • Avoid using a telephone during a thunderstorm. There may be a slight chance of electric shock from lightning.
Appendix Important safety instructions Especially about cordless telephones • Privacy: The same features that make a cordless phone convenient create some limitations. Telephone calls are transmitted between the base and the handset by radio waves, so there is a possibility that your cordless phone conversations could be intercepted by radio receiving equipment within range of the cordless handset.
Appendix Important safety instructions • Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe manner. Do not burn or puncture. Like other batteries of this type, if burned or punctured, they could release caustic material which could cause injury. The RBRC™ Seal means that the manufacturer is voluntarily participating in an industry program to collect and recycle nickel-metal hydride rechargeable batteries when taken out of service within the United States.
Appendix FCC Part 68 & ACTA This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US: AAAEQ##TXXXX. This identifier must be provided to your local telephone company upon request.
Appendix FCC Part 68 & ACTA If this product is equipped with a corded or cordless handset, it is hearing aid compatible. If this product has memory dialing locations, you may choose to store emergency telephone numbers (e.g., police, fire, medical) in these locations. If you do store or test emergency numbers, please: • Remain on the line and briefly explain the reason for the call before hanging up. • Perform such activities in off-peak hours, such as early morning or late evening.
Appendix FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Appendix Limited warranty The AT&T brand is used under license - any repair, replacement or warranty service, and all questions about this product should be directed to: In the United States of America visit www.telephones.att.com or call 1(800) 2223111. In Canada dial 1 (866) 288-4268. 1.
Appendix Limited warranty 4.
Appendix Limited warranty 6. What must you return with the PRODUCT to get warranty service? You must: a. Return the entire original package and contents including the PRODUCT to the service location along with a description of the malfunction or difficulty; and b. Include “valid proof of purchase” (sales receipt) identifying the PRODUCT purchased (PRODUCT model) and the date of purchase or receipt; and c. Provide your name, complete and correct mailing address, and telephone number. 7.
Appendix Technical specifications RF frequency band (handset to base) 2400 MHz — 2483.5 MHz RF frequency band (base to handset) 2400 MHz ������������ —����������� 2483.5 MHz Channels 95 Operating temperature 32°F — 122°F 0°C — 50°C Telephone base voltage (AC adapter input) AC117V 60Hz Telephone base�������� voltage (AC adapter output) DC9V 400mA Handset voltage 3.
Appendix Index A Alert tones, 44 Answering calls, 11 Answering system, 35-43 Announcement, 37 F FCC and ACTA, 58 H Hands-free use, 11 Handset locator, 13 Headset, 10 B Battery charging, 7 Battery installation, 7 Belt clip, 10 Brightness, 23 I Important safety instructions, 55 Intercom, 16 Intercom call transfer, 17 Incoming call log, 34 Incoming calls answering, 11 Indicator lights, 44 C Call intercept, 42 Call screening, 42 Call log, 31 Call transfer, 17 Call waiting, 14 Caller ID, 31-34 Clear voice m
Appendix Index O Operating range, 64 W Wall mounting, 8 Wallpaper, 22 Warranty, 61 P Part checklist, 4 Predial, 11 Power adapter, 6 Q Quick reference guide, 2-3 R Receiving calls, 11 Recharging, 7 Redial, 12 Remote access, 43 Ring silencing, 12 Ringer melody, 21 Ringer volume, 24 S Screen display messages, 45 Screen icons, 44 Search for names, 29 Set day and time, 36 Speakerphone, 11 T Tabletop mounting, 9 Technical specifications, 64 Telephone base installation, 5-6 Temporary ring silencing, 12 Temporay
Appendix Remote access wallet card Use the wallet card below to help you remember commands to control your answering system from any touch tone telephone. Cut along dotted line. Call your phone number, then enter your two-digit access code (preset to 19). Action Fold here. Remote command Play all messages...................1 Play new messages................2 Delete the message...............3 Delete all old messages......33 Repeat or go back..................4 Stop...................................
www.telephones.att.com © 2007 Advanced American Telephones. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T Knowledge Ventures, licensed to Advanced American Telephones. Printed in China. Issue 2 AT&T 03/07.
