Instruction manual

Uploading Files From Power Zone™ Plus Notebook to Your Computer

You can store your Power Zone™ Plus Notebook files on your computer. This

is called “backing up” your files. The process of sending files from your Power

Zone™ Plus Notebook to your computer is called, “uploading” . This section

explains how to “upload” files from your Power Zone™ Plus Notebook to

your computer.

Uploading Files onto Your PC

1. Make sure your Power Zone™ Plus Notebook is properly connected to

your computer using the sync cable.

2. Make sure Sync Manager is running.

3. All other programs sharing the COM port with the Sync Manager should

be closed.

4. Press the File Transfer button on your Power Zone™ Plus Notebook.

5. At the File Transfer screen, all the files that can be uploaded from the Power

Zone™ Plus Notebook to your PC should appear. All of the files that appear

are automatically selected for uploading.

6. If you do not want to upload the file to your PC, you can deselect a file by

unchecking the box in front of the file.

7. To begin uploading the files to your PC, click on the upload icon located at

the right-hand corner of the screen.

Chapter 9. VT-41 Printer Connection

Power Zone™ Plus Notebook only supports the

VTech® VT-41 printer (sold separately). If you do not have

a VT-41 printer, you can use the VTech® Desktop Software

to print through your desktop computer’s printer.

1. Make sure both the Power Zone™ Plus Notebook

learning aid and the VT-41 printer are turned OFF.

2. Locate the serial port on the left of Power Zone™

Plus Notebook.

3. Connect the printer plug to the serial port.

4. Turn ON Power Zone™ Plus Notebook and the

printer.

Troubleshooting for VT-41 Printer Errors

Please check for these faults and once you have solved the problem, reset

the printer or follow the Printer Connection instructions in this manual. If

you have any other problems with your printer, please refer to your printer’s

manual for details. When a Printer Error message appears, you may have

encountered one or more of the following errors: