User`s manual

7676
9.11 Recording Time
You can set the recording time limit for each incoming message.
To change the setting:
Press MENU in idle mode to enter the main menu.
Press or on the handset, or press or on the telephone base
to highlight Answering sys, then press SELECT.
Press or on the handset, or press or on the telephone base
to highlight Ans sys setup, then press SELECT.
Press or on the handset, or press or on the telephone base
to highlight Recording time, then press SELECT.
Press or on the handset, or press or on the telephone base
to choose from 3 minutes, 2 minutes, or 1 minute, then press SET to save. You
hear a conrmation tone.
9.12 Answering System and Voicemail
Your telephone has separate indicators for two different types of voice messages:
those recorded on its built-in answering system and those recorded in your service
provider’s voicemaiI (fees may apply). Your telephone’s built-in answering system
messages and voicemail messages are separate. Each alerts you to new messages
differently.
If and XX New messages display on the telephone base and handsets, there are
new messages in the built-in answering system. To listen to messages recorded on
your digital answering system, press on the telephone base.
If and New voicemail display on telephone base and handsets, your telephone
service provider is indicating that it has new voicemai I for you. To listen to your
voicemail, you typically dial an access number provided by your telephone service
provider, followed by a security code or PIN.
Some service providers bundle or combine multiple services like voicemail and call
waiting, so you may not be aware that you have voicemail. To check what services
you have and how to access them, contact your telephone service provider.
To use your voicemail service rather than your answering system, turn off your
answering system. To use your answering system rather than your voicemail service,
contact your telephone service provider to deactivate yourvoicemaiI service.
1.
2.
3.
4.
5.