User`s manual

7474
9.8 Number of Ringers
When the answering system is turned on, it answers all incoming home calls after the
number of rings set. You can choose from 2, 3, 4, 5, or 6 rings; or time saver. With
time saver selected, the answering system answers after 2 rings when you have new
messages, and after 4 rings when you have no new messages. This enables you to
check for new messages and avoid paying unnecessary long distance charges ifyou
are calling from out of your local area.
To set the number of rings:
Press MENU in idle mode to enter the main menu.
Press or on the handset, or press or on the telephone base
to highlight Answering sys, then press SELECT.
Press or on the handset, or press or on the telephone base
to highlight Ans sys setup, then press SELECT.
Press or on the handset, or press or on the telephone base
to highlight # of rings, then press SELECT.
Press or on the handset, or press or on the telephone base
to choose from 6, 5, 4, 3, 2 or Time saver, then press SET to save. You hear a
conrmation tone.
note
If you set the number of rings for the answering system as 2 or 3 rings, the Voice
Announce Caller ID feature may not have enough time to announce the caller’s full
information.
9.9 Remote Access Code
A 2-digit security code is required to access the answering system remotely from
any touch-tone telephone. The preset code is 00. You can change the code to any
number from 00 to 99.
To change the remote access code:
Press MENU in idle mode to enterthe main menu.
Use or on the handset, or press or on the telephone base to
scroll to Answering sys, then press SELECT.
Use or on the handset, or press or on the telephone base to
scroll to Ans sys setup, then press SELECT.
Press or on the handset, or press or on the telephone base
to scroll to Remote code, then press SELECT.
1.
2.
3.
4.
5.
1.
2.
3.
4.