User`s manual

46
5.26.2 Make a Call Using Power Fail Back-Up Mode
If there is only one handset registered to the base:
1. Once the handset is placed onto the main base unit, enter the telephone
number, and then press or . The speakerphone will be turned on
automatically and call is made.
OR
Lift up the handset and enter the telephone number
Place the handset back onto the main base unit within 60 seconds.
The speakerphone will be turned on automatically and call is made. Handset
may show Please wait… whilst the handset starts up the base before dialling.
To end the call, press .
If there is more than one handset registered to the base, the handset on the
main base unit should be left as a power supply of the base and you can use the
other handset(s) to make calls like normal.
note
The handset should always remain on the main base unit for the entire length of
the call.
5.26.3 Answer a Call Using Power Fail Back-Up Mode
If there is only one handset registered to the base:
When the phone rings, keep the handset on the main base unit and press or
to answer the call. The speakerphone will be turned on automatically and
call is answered.
To end the call, press .
If there is more than one handset registered to the base, the handset on the
main base unit should be left as a power supply of the base and you can use the
other handset(s) to receive calls like normal.
noteS
The power supplying handset should always be placed on the main base unit for
the entire length of the call.
The range of the base unit is limited during Power Fail Back-Up mode. Keep the
handset close to the base unit.
In Power Fail Back-Up mode none of the base functions, including the
answering machine and BLUETOOTH
®
of your cordless phone will operate.
1.
2.
3.
1.
2.
1.
2.
3.