User`s manual

BLUETOOTH

10. When a device is successfully connected, the handset displays Headset A is

added and connected to base and the corresponding status icon ( 1 or 2 ).

You hear a conrmation tone. The corresponding light on the telephone base

(DEVICE 1 or DEVICE 2) turns on.

noteS

The pairing process may take up to one minute. If the pairing process fails, try

again.

When a connected headset is charging, it may disconnect from the telephone

base and the corresponding light on the telephone base (DEVICE 1 or

DEVICE 2) turns off. For some headset models, you may need to turn on the

headset and reconnect it to the telephone base again.

4.3.3 Auto Connection

When an active device moves within BLUETOOTH

range of the telephone base, or

is turned on within range, the telephone base tries to connect to the device. When the

device moves out of range, it is disconnected. Your device might make a connect or

disconnect sound.

A connected device could also be disconnected by:

Turning off the BLUETOOTH

device.

Turning off the BLUETOOTH

feature of the device.

Disconnecting through the telephone base Device list. If you disconnect through the

Device list, the telephone base will not attempt to reconnect until your device is

moved out of range and then moves back in range again.

4.3.4 BLUETOOTH

Connection from Idle Mode

When you have active devices that are not connected, CONNECT appears on the

telephone base in idle mode. Press CONNECT to start connecting an active device.

When there are two active devices, the screen will prompt you to choose one before

connection.

4.3.5 Device List and Connection

Up to 4 devices can be paired to the telephone base. All paired devices are shown

on the device list. To use a paired device, it must be in an active slot (DEVICE 1 or

DEVICE 2) on the device list and connected. Only one BLUETOOTH

mobile phone or

a headset can be on a call at a time.

Once you have paired a device with the telephone base, you do not need to repeat

the pairing procedure again unless you delete the device from the device list.

note

When connecting a BLUETOOTH

device to the device list, all connected devices

will be temporarily disconnected until the procedure is complete. It may take up to 2

minutes to reconnect.