User`s manual

25
BLUETOOTH
4.3 BLUETOOTH
®
Setup
To use a BLUETOOTH
®
enabled mobile phone with your telephone, you must rst pair
and connect your BLUETOOTH
®
mobile phone with the telephone base. All handsets
can be used to make or answer calls on the mobile phone line.
BLUETOOTH
®
wireless technology operates within a short range (up to 9 metres).
When you pair a BLUETOOTH
®
mobile phone or BLUETOOTH
®
headset to the
telephone base, keep the device within 4.5 metres of the telephone base for optimal
performance.
4.3.1 Add a Mobile Phone
Before you begin, make sure that you have mobile coverage and your BLUETOOTH
®
enabled mobile phone is not connected to any other BLUETOOTH
®
device. Refer to
your mobile phone user’s manual to learn how to search for or add new BLUETOOTH
®
devices.
To pair and connect a mobile phone:
Press MENU in idle mode to enter the main menu.
Press , to highlight BLUETOOTH, then press SELECT.
Press SELECT to choose Add device.
Press SELECT again to choose Add mobile. The screen displays Please wait...
followed by 1. If mobile is connected to BT device, please disconnect it.
If there are already 4 paired devices on the device list, the 4th device on the device
list will be automatically removed, regardless of whether the new device pairing is
successful or not.
If there are already 2 active devices on the device list with prex D1: or D2:, the
handset shows Only 2 devices can be ready for connection. You are prompted
to deactivate an active device.
5. Press NEXT. The screen displays Place mobile phone next to base.
All devices that are connected to the telephone base are disconnected until the
pairing process is completed.
6. Press NEXT to turn on the telephone base discoverable mode. The screen displays
Set mobile to search base: discoverable PIN: 0000. Promptly turn on the
BLUETOOTH
®
feature of your mobile phone and search for or add new devices.
7. Your mobile phone may require a passcode. In this case the handset screen
displays Check mobile. ENTER PASS CODE. Enter the mobile phone passcode
into the handset and press SET to save.
8. Enter the PIN of the telephone base (the default PIN is 0000) into your mobile
phone to continue the pairing process. The handset displays Adding Mobile Phone
A to device list...
9. When a device is successfully connected, the handset displays Mobile Phone A
is added and connected to base. You hear a conrmation tone. The
corresponding status icon ( 1 or 2) displays. The corresponding device light on
the telephone base (DEVICE 1 or DEVICE 2) turns on.
1.
2.
3.
4.