User`s manual

11
2.7.2 Wall Mount to Tabletop Installation
To change the telephone base from the wall mount position to tabletop position, follow
the steps below.
If the telephone line cord and power adaptor cord are bundled, untie them rst.
Push the telephone base up to remove it from wall. Unplug the telephone line cord
(or DSL lter) from the wall. Unplug the power adaptor from the mains socket.
1.
2.
3. Gently pull upward to release the wall mount bracket. Rotate the wall mount
bracket up to tabletop position and push it into the telephone base until it clicks
into place.
4. See Connect the Base Station on page 4.
SET UP THE TELEPHONE