User`s manual

7
Voicemail indicators
If you subscribe to voicemail service offered by your telephone service provider,
New voicemail and appear on the handsets when you have new voicemail
messages. Contact your telephone service provider for more information and
assistance about using your voicemail service. Refer to Clear voicemail indicators
in the online Complete user’s manual on how to clear the voicemail indicators.
Telephone operation
Make a home call
Press /HOME or , and then dial the telephone number.
Make a cell call
Press /CELL. Scroll to select the desired cell phone when
necessary, then press SELECT.
Enter the telephone number and then press /CELL to dial.
While using the cell line, place your cell phone closer to the
telephone base, and make sure that there are no physical
obstacles between the telephone base and the cell phone,
such as large furniture or thick walls.
Answer a home/cell call
For a home line call, press /HOME, or any dialing key.
For a cell line call, press /CELL, or any dialing key.
End a home/cell call
Press OFF or put the handset to the telephone base or charger.
Speakerphone
During a call, press to switch between speakerphone and normal handset use.
Volume
During a call, press VOLUME/ or VOLUME/ to adjust the listening volume.
The handset earpiece volume setting and speakerphone volume setting
are independent.
Mute
The mute function allows you to hear the other party but the other party cannot
hear you.
During a call, press MUTE. The handset displays Muted.
Press MUTE again to resume the conversation.
Call waiting
When you subscribe to call waiting service from your telephone service provider,
you hear an alert tone if there is an incoming call while you are on another call.
For a home call, press FLASH to put the current call on hold and take the new
call, or switch back and forth between calls.
For a cell call, press /CELL to put the current call on hold and take the new
call, or switch back and forth between calls.
Temporary ringer silencing
When the telephone is ringing, you can temporarily silence the ringer of the handset
without disconnecting the call. The next call rings normally at the preset volume.
Press OFF or MUTE on the handset. displays and Ringer muted
displays briefly.
Temporary tone dialing
If you have pulse (rotary) service only, you can switch from pulse to tone dialing
temporarily during a call.
During a call, press .
Use the dialing keys to enter the relevant number. The telephone sends
touch-tone signals. It automatically returns to pulse dialing mode after you end
the call.
Find handset
Use this feature to find all system handsets.
To start paging:
Press /FIND HANDSET on the telephone base. All idle
handsets ring and display ** Paging **.
To end paging:
Press /FIND HANDSET again on the telephone base.
Press /HOME, /CELL, , CANCEL or any dialing
key on the handset.
Place the handset in the telephone base or charger.
Do not press and hold /FIND HANDSET for more than four seconds. It may lead to
handset deregistration.
•
1.
2.
•
•
•
•
•
•
1.
2.
•
•
•
1.
2.
•
•
•
•