User`s manual

69
icon does not appear to be filling
• Try cleaning the charging contacts.
• Check that the mains power is correctly connected.
• If the above measures do not correct the problem, replace the battery pack.
You hear the busy tone when you press
F
• Make sure the handset is in range of the base.
• Another handset registered to your DS6321 base may be on the line.
Answering machine does not record any messages
• Make sure the answering machine is switched on. See page 51.
• The memory may be full, please delete some old messages to free up space. See page 52.
• Make sure answering machine is set to ANSWER & RECORD mode.
Answering machine messages have the wrong date and time
• Have you manually set the date and time? See page 47.
Cannot access your messages from another phone
• Have you changed the remote access security PIN code? See page 57. Always keep a note of the new PIN code in a
safe place.
• Has remote access been disabled? To enable remote access, see page 57.
• Make sure you are calling from a touch-tone telephone. When dialing a number, there should be tones. If there are
clicks, then it is not a touch-tone telephone and cannot activate the answering machine.
• The answering machine might not detect the remote access code when your announcement is playing. Wait until the
announcement is over before entering the code.
• There might be interference on the telephone line you are using. Press the dial pad keys firmly when dialing.