User`s manual

3
2.3 Connecting the base station
Before you can start using your telephone you must plug in the telephone connection cords and the mains cable.
Connecting the base station:
1. Plug the power supply & telephone line cord into the base station.
2. Plug the power supply cord into the wall outlet not controlled by a wall switch.
3. Plug the telephone line cord into the wall jack. If you have DSL high speed internet service, a DSL filter (not included) is
required.
4. Always use the cables provided in the box.
Note:
Ensure the line cord and power supply cord is fed through the slot on the base so unit sits flush with the desk.
Power supply cord
Telephone line cord