User`s manual

Additional handsets

10.9 Register an additional handset

Your additional handset(s) will come pre-registered but should you need to register a handset, follow these steps.

1. In standby mode, press

N then +/- to select SETTINGS.

2. Press

N then +/- to select REGISTER.

3. Press

N then enter the system PIN. (Default is 0000.)

4. Press

N. Then the display will show PRESS AND HOLD PAGE BUTTON.

5. Press and hold

P on the base. The handset display will show REGISTERING.... The handset will return to standby

mode if registration is successful.

Note:

If the base is found and the PIN is correct, an unused handset number will be assigned automatically.

If the PIN is incorrect, "INCORRECT PIN!" will display with an error tone, you will need to re-enter the correct PIN. If the

base is not found, "NO BASE FOUND" will display.