User`s manual

21
4.7.5 Remove an active device
You can remove an active device from the active devices list.
1. In standby mode, press
N then +/- to select BLUETOOTH.
2. Press
N then +/- to select ACTIVE DEVICES.
3. Press
N then +/- to select the desired device.
4. Press
N then +/- to select REMOVE ACTIVE.
5. Press
N. The handset displays DEVICE REMOVED FROM ACTIVE LIST.
Note:
Even though the active device is removed from the active devices list, it is still on the paired devices list.
4.8 Change PIN
You are required to enter a PIN when establishing a Bluetooth connection. The default PIN of your telephone base is 0000.
1. In standby mode, press
N then +/- to select BLUETOOTH.
2. Press
N then +/- to select CHANGE PIN.
3. Press
N. The display shows ENTER NEW PIN and the existing PIN.
4. Use the keypad to enter a new four-digit code. (See Writing tips on page 10).
5. Press
N to save.