User`s manual

Bluetooth
20
7. Press +/- to select the device to be replaced, then press N. The handset displays DEVICE REMOVED FROM
ACTIVE DEVICES LIST and then CONNECTING MOBILE PHONE A TO THE BASE....
8. Depending on your mobile phone settings, you may need to press a key on your mobile phone to confirm the
connection. When you successfully replace and connect an active device with a paired device, the handset displays
DEVICE CONNECTED.
4.7.4 Add an active device
You can have a maximum of two devices on the active devices list.
1. In standby mode, Press
N then +/- to select BLUETOOTH.
2. Press
N then +/- to select ACTIVE DEVICES.
3. Press
N then +/- to select empty position.
4. Press
N. The display shows ADD.
5. Press
N then +/- to select a device from the paired devices list.
6. Press
N. The handset displays DEVICE ADDED TO ACTIVE LIST and then CONNECTING MOBILE PHONE B TO
THE BASE.... If there are no paired devices to add, the handset displays ALL PAIRED DEVICES ARE ALREADY
CONNECTED.
7. Depending on your mobile phone settings, you may need to press a key on your mobile phone to confirm the
connection. When you successfully add and connect an active device, the handset displays DEVICE CONNECTED.