User`s manual

19
4.7.2 Connect/disconnect an active device
While in the active devices menu, you may connect or disconnect your active device.
1. In standby mode, Press
N then +/- to select BLUETOOTH.
2. Press
N then +/- to select ACTIVE DEVICES.
3. Press
N then +/- to select a device when necessary.
4. Press
N then +/- to select CONNECT or DISCONNECT (whichever is applicable)
5. Press
N to confirm. The handset displays DEVICE CONNECTED/DEVICE DISCONNECTED.
Note:
When your active device is connected, you are prompted to select DISCONNECT. When your active device is
disconnected, you are prompted to select CONNECT.
4.7.3 Replace an active device
You can replace an active device with a device on the paired devices list even if you already have two devices on the active
devices list.
1. In standby mode, press
N then +/- to select BLUETOOTH.
2. Press
N then +/- to select PAIRED DEVICES.
3. Press
N then +/- to select a device.
4. Press
N then +/- to select CONNECT.
5. Press
N. The handset display MAXIMUM OF 2 DEVICES CAN BE CONNECTED and then REPLACE AN EXISTING
ACTIVE DEVICE WITH MOBILE? PRESS OK.
6. Press
N. You are prompted to select a device on the paired devices list.