User`s manual

Bluetooth
18
4.6.2 Remove a paired device
If you want to add another Bluetooth device and you already have the maximum of four devices on the paired devices list,
you must first delete a device from the paired devices list.
1. In standby mode, Press
N and +/- select to BLUETOOTH.
2. Press
N then +/- to select PAIRED DEVICES.
3. Press
N then +/- to select a device when necessary.
4. Press
N then +/- to select REMOVE PAIRED.
5. Press
N. The screen displays REMOVE DEVICE FROM PAIRED LIST? PRESS OK.
6. Press
N to confirm. The handset displays DEVICE REMOVED FROM PAIRED LIST.
4.7 Active devices
Only devices on the active devices list can establish a Bluetooth connection with the telephone base. Although two paired
devices can be connected to the telephone base, only one Bluetooth mobile phone or a headset can be on a call at a time.
Note:
When adding, removing, or replacing a Bluetooth device on the active devices list, all connected devices are temporarily
disconnected until the procedure is complete. It may take up to two minutes to reconnect.
4.7.1 Review the active devices list
1. In standby mode, Press N then +/- to select BLUETOOTH.
2. Press
N then +/- to select ACTIVE DEVICES.
3. Press
N then +/- to review.