User`s manual

8. When a device is successfully connected, the handset displays PAIRED WITH MOBILE and then MOBILE SETUP

COMPLETED DEVICE CONNECTED. The corresponding status icon (

or ) displays. The corresponding device

light on the telephone base (DEVICE1 or DEVICE2) turns on.

• When you already have two devices on the active devices list, the handset shows MAXIMUM OF 2 DEVICES CAN

BE CONNECTED. You are prompted to replace an existing device on the active devices list.

Note:

The pairing process may take up to one minute. If the pairing process fails, try again. The steps for the pairing process may

vary for different mobile phones. If this happens, follow the prompts on your mobile phone and your DS6321 to complete the

pairing process. If you put the handset back in the telephone base or charger while pairing, the process discontinues and

the handset returns to idle mode.

Auto connection

When a device is successfully paired with the telephone base but not connected, the handset displays MOBILE SETUP

COMPLETED DEVICE NOT CONNECTED and then AUTO-CONNECT FUNCTION ENABLED PRESS OK. You can press

N to exit. You can also connect a device manually.

4.5 Pair and connect a headset

Before you begin, make sure that your Bluetooth enabled headset is not connected to any other Bluetooth device. Refer to

your headset User Manual to learn how to search for or add new Bluetooth devices.

1. In standby time. Press

N then +/- to select BLUETOOTH.

2. Press

N then +/- to select ADD HEADSET.

3. Press

N. The display shows ADD HEADSET PLACE BLUETOOTH HEADSET NEXT TO BASE. PRESS OK.

• If there are already four devices on the paired devices list, the screen displays MAXIMUM OF 4 DEVICES CAN BE

PAIRED and prompts you to replace an existing paired device.