User`s manual

Bluetooth
14
4.3 Bluetooth setup
To use a Bluetooth enabled mobile phone with your DS6321, you must first pair and connect your Bluetooth device(s) with
the telephone base. All DS6321 handsets can be used to make or answer calls on the mobile phone line.
Bluetooth wireless technology operates within a short range. When you pair a Bluetooth mobile phone or Bluetooth headset
to the telephone base, move closer to the telephone base to maintain sufficient signal strength.
4.4 Pair and connect a mobile phone
Before you begin, make sure that:
• You have mobile coverage
• Your Bluetooth enabled mobile phone is not connected to any other Bluetooth device (laptop, headset...).
Refer to your mobile phone User Manual to learn how to search for or add new Bluetooth devices.
1. In standby mode, press
N then +/- to select BLUETOOTH.
2. Press
N then +/- to select ADD MOBILE.
3. Press
N. The display shows ADD MOBILE PLACE MOBILE PHONE NEXT TO BASE. PRESS OK.
• If there are already four devices on the paired devices list, the display shows MAXIMUM OF 4 DEVICES CAN BE
PAIRED and prompts you to replace an existing paired device.
4. Press
N. The screen displays PLEASE SET YOUR MOBILE PHONE TO SEARCH FOR DEVICES, THEN PRESS OK.
• If a device is already connected to the telephone base, the screen displays CONNECTED DEVICE WILL BE
TEMPORARILY DISCONNECTED. PRESS OK. Press
N to temporarily disconnect the device and continue the
pairing process.
5. Press
N to set the telephone base to discoverable mode. Then, promptly turn on the Bluetooth feature of your mobile
phone and search for or add new devices.
6. Once your mobile phone finds DS6321, press the appropriate key on your mobile phone to continue the pairing process.
7. Enter the PIN of the telephone base (the default PIN is 0000) into your mobile phone to continue the pairing process.