User`s manual

4.2 Glossary of terms

Below are some terms used in this User Manual to help you become familiar with using your Bluetooth devices and your

new DS6321 telephone system.

Note:

Mobile Phone A or B, Headset A or B mentioned in this user's manual are just for illustration purpose, the corresponding

Bluetooth device name will be displayed in actual operation.

Active devices Bluetooth enabled devices, paired and connected to the telephone base. A maximum of two

paired devices (two mobile phones, or one mobile phone and one headset) can be connected

to the telephone base, but only one can be on a call at a time.

Bluetooth mobile phone Refers to a mobile Bluetooth enabled mobile telephone.

Mobile line The telephone line associated with your mobile phone service. On your handset, press

C to

use the mobile line.

Connected A Bluetooth enabled device (mobile phone or headset) can only be used when it is connected

to the telephone base. When a Bluetooth enabled device is connected to the telephone base

and listed on the active devices list, it is ready for use.

Disconnected A diagonal line appears across DEVICES 1 and/or 2 when the corresponding Bluetooth

enabled device is disconnected from the telephone base.

Discoverable mode Before a Bluetooth enabled device can be paired, it must be set to this mode. When pairing

your mobile phone, the telephone base is in this mode. Depending on the manufacturer, this

mode is sometimes referred to as FIND ME or VISIBILITY.

Home line Your conventional telephone land line. On your handset, press

F to use the home line.

Paired devices Bluetooth enabled devices (mobile phone or headset) that have shared registration information

with the telephone base. A total of four Bluetooth enabled devices can be paired with the

telephone base; however, only two paired devices can be connected to the base at a time.

Pairing Sometimes refers to as BONDING. The process of sharing registration information between

two Bluetooth enabled devices. Your Bluetooth enabled mobile phone or headset must first be

paired to the telephone base in order to use it with this cordless phone system.

PIN By default, the PIN is 0000 for the telephone base and for most Bluetooth devices. PIN

information must be exchanged between Bluetooth devices before they can be used. This is

also known as a PASSKEY or PASSCODE.