User Manual

35
4. Press q or p to choose Screening
annc, then press SELECT.
5. Press q or p to choose Rec your
name, then press SELECT. The system
announces, “Record after the tone.
Press STOP when you are done.”.
6. Speak towards it to record your name.
Press STOP to end recording.
To listen to the announcement with your
recorded name again, scroll to Play annc
and press SELECT.
Reset all your screening
announcements
1. Press Call block when the phone is not
in use.
-OR-
Press MENU when the phone is not in
use. Press q or p to scroll to Smart
call blk and then press SELECT.
2. Press q or p to choose SCB Setup,
then press SELECT.
3. Press q or p to choose Line 1 or Line
2, then press SELECT.
4. Press q or p to choose Screening
annc, then press SELECT.
5. Press q or p to choose Reset annc,
then press SELECT. The screen shows
Reset to default annc?.
6. Press YES to confirm. The screen
shows Annc. reset to default before
returning to the previous menu.
Your name will be deleted from all the
screening announcements, and the
telephone will use the default screening
announcements described.
Play your current announcement of
screening without caller name
1. Press Call block when the phone is not
in use.
-OR-
Press MENU when the phone is not in
use. Press q or p to scroll to Smart
call blk and then press SELECT.
2. Press q or p to choose SCB Setup,
then press SELECT.
3. Press q or p to choose Line 1 or Line
2, then press SELECT.
4. Press q or p to choose Screening
annc, then press SELECT.
5. Press q or p to choose Play annc,
then press SELECT.
6. Press SELECT again to select w/o Caller
name. The announcement begins to
play, and the screen displays Playing
announcement....
Options during playback:
• Press p/VOLUME/q on the handset
or p/VOL/q on the telephone base to
adjust the listening volume.
• Press STOP, 5 or OFF on the handset or
STOP, 5 or CANCEL on the telephone
base to stop at any time.
• Press on the handset to switch
between the speakerphone and the
handset earpiece.
Record your name for all screening
announcements
1. Press Call block when the phone is not
in use.
-OR-
Press MENU when the phone is not in
use. Press q or p to scroll to Smart
call blk and then press SELECT.
2. Press q or p to choose SCB Setup,
then press SELECT.
3. Press q or p to choose Line 1 or Line
2, then press SELECT.