Technical information

Created May 2008

Confidential and proprietary information of T-Mobile USA

NOT FOR CUSTOMER DISTRIBUTION (Sales Only)

How to Set Up T-Mobile @Home

The Magic Is in the Router!

T-Mobile @Home only works with our special wireless router (the T-Mobile @Home HiPort™) that includes

two phone ports and space for two SIM cards. Customers plug a corded or cordless phone and their computer

directly into the wireless router.

9-1-1

Before setting up the equipment, customers must register the physical address where the home phone service

will be used or they will not be able to complete the setup process. Registration is normally completed during

service activation and can also be completed on My T-Mobile or by calling Customer Care.

Step 1:

Install the SIM card (Rep installs SIM card)

1. Slide the SIM card cover down, and then lift it off.

2. Gently slide up the SIM 1 card holder. From the bottom side, lift up the

SIM card holder.

3. Insert the SIM card with the gold metal side up and toward the card

slot opening.

4. Fold down the SIM card holder and slide it down into place.

5. Replace the SIM card cover.

Note: A second SIM card is required if a customer wants to have two home phone numbers.

QuickTime™ and a

decompressor

are needed to see this picture.

QuickTime™ and a

decompressor

are needed to see this picture.

QuickTime™ and a

decompressor

are needed to see this picture.