Cordless Telephone User Manual

www.vtechphones.com

Getting started

Basic operation

Getting started

If the handset

will not be used

for a long time,

disconnect and

remove the battery

to prevent possible

leakage.

To purchase

replacement

batteries, visit our

website at www.

vtechphones.

com or call

1 (800) 595-9511.

In Canada, go to

www.vtechcanada.

com or call 1 (800)

267-7377.

•

Battery installation and charging

Install the battery as shown below. The battery may have enough charge for short

calls. For best performance, charge the handset for at least 16 hours. When the

battery power is low, the handset will beep, display LOW BATTERY and will

ash on the handset screen. Place the handset in the telephone base or charger

to charge the battery when not in use. When fully charged, the handset battery

provides approximately nine hours of talk time or ve days of standby time.

Insert the plug of the battery as indicated. Make sure it is plugged securely

and matches the color-coded label inside the battery compartment.

Place the battery with the label THIS SIDE UP facing up and the wires inside

the battery compartment.

Align the cover at against the battery compartment, then slide it upwards

until it clicks into place.

Charge the handset by placing it in the telephone base or charger. The handset

charge light will be on when charging.

Charge light