Cordless Telephone User Manual

35
Telephone operation
Answer PTT
You can respond to a PTT call whenever the speakerphone light is off, as
described below.
When your handset receives a PTT call, the handset beeps and displays
Press and hold [PTT] to talk.
When someone else is speaking, your speakerphone light is on, and
your handset displays PTT From HSX to HSX (the rst X represents the
initiating handset number, the second X represents your handset number; a
maximum of four handset numbers appear).
When your speakerphone light is off (the handset displays Press and hold
[PTT] to talk), press and hold PUSH TO TALK on your handset. When you
hear a chirp, speak towards the handset.
While you are speaking, your handset displays PTT To HANDSET X (X
represents the handset numbers of one or more destination handsets; a
maximum of four handset numbers appear).
Your voice is broadcast to all destination handsets.
After speaking, release PUSH TO TALK. Your handset will beep. After
the beep, if your speakerphone light is off, you can press and hold
PUSH TO TALK to continue speaking or the destination handset
can respond.
Change a one-to-one PTT to intercom
You can convert a one-to-one PTT conversation to an intercom call.
When your handset displays Press and hold [PTT] to talk, press
MENU/SELECT. It displays
>
Intercom.
Press MENU/SELECT. Your handset displays Calling other handset
or Calling HANDSET X. The destination handset momentarily displays
Push to talk Ended and then Other handset is calling.or HANDSET X is
calling The destination handset rings.
On the destination handset, press /FLASH, or any of the dialing
keys (0-9, #, TONE ) to answer the intercom call. Both handsets now
display Intercom.
To end an intercom call, press OFF/CLEAR or place the handset in the
telephone base or charger. Both handsets display Intercom ended.
1.
2.
3.
•
•
1.
2.
3.
4.