Cordless Telephone User Manual

25
Telephone operation
Mute
The mute function allows you to hear the other party but
the other party cannot hear you.
On a handset:
During a call, press MUTE/REMOVE. The handset
screen displays Muted for a few seconds and
MUTE displays until the mute function is turned off.
Press MUTE/REMOVE again to resume the
conversation. The handset screen temporarily
displays Microphone ON.
On a headset:
During a call, press MUTE/FLASH. The headset announces, “Mute on.” The
headset beeps every 30 seconds until the mute function is turned off.
Press MUTE/FLASH again to resume the conversation. The headset
announces, “Mute off.”
Temporary ringer silencing
When the telephone is ringing, you can temporarily silence the ringer of the
handset, headset or telephone base without disconnecting the call. The next
call rings normally at the preset volume.
To silence the handset ringer:
Press OFF/CLEAR or MUTE/REMOVE on the handset,
then Ringer mute and display.
To silence the headset ringer:
Press MUTE/FLASH on the headset.
To silence the telephone base ringer:
Press VOL/ on the telephone base to turn off the base ringer.
Temporary tone dialing
If you have pulse (rotary) service only, you can switch from pulse to tone
dialing temporarily during a call. This is useful if you need to send touch-tone
signals to access your telephone banking or long distance services.
During a call, press TONE on the handset.
Use the dialing keys to enter the number. The telephone now sends
touch-tone signals.
The telephone automatically returns to pulse dialing mode after you end
the call.
•
•
•
•
•
•
•
1.
2.
3.
Muted
3:15PM
MUTE
12/25
Ringer mute