Users Manual

EN - 16
• To switch a call from the telephone base
speakerphone to the cordless handset
which is not on the telephone base cradle,
press FLASH/TALK or / SPEAKER on the
cordless handset.
• To switch a call from the telephone base
speakerphone to the cordless handset which
is cradled on the telephone base, lift the
cordless handset from the telephone base.
Share a call
A maximum of two cordless handsets can
be used at the same time on an external
call.
Join a call
During a call, press FLASH/TALK or /
SPEAKER on another cordless handset to
join.
Handset speakerphone
During a call, press / SPEAKER on
the cordless handset to switch between
speakerphone mode and handset earpiece
mode.
Volume
Listening volume can be adjusted on the
cordless handset and the telephone base.
Adjust the listening volume
• During a call on the handset, press
-VOLUME+ on it to adjust the listening
volume. The next call returns to the default
listening volume.
• During a call on the telephone base, press
VOL+ and VOL- to adjust the listening
volume. The next call returns to the default
listening volume.
Adjust the ringer volume of the telephone
base
Ringer volume of the telephone base can be
adjusted. When the telephone base is idle,
press VOL+ and VOL- to adjust the ringer
volume.
Call waiting
1. When you hear a call waiting tone during
a call, press FLASH/TALK on the cordless
handset to put the current call on hold and
take the new incoming call.
2. Press FLASH/TALK at any time to switch
back and forth between calls.
Mute
Mute the microphone
1. During a call, press MUTE on the
cordless handset.
• The MUTE key illuminates when the mute
function is turned on. You can hear the party
on the other end but they cannot hear you.
2. Press MUTE again to resume the
conversation.
• The light on the MUTE key turns off.