User`s manual

3
Battery charging
Once you have installed the battery, the screen indicates the battery status. For
best performance, keep the handset in the telephone base or charger when not in
use. The battery is fully charged after 11 hours of continuous charging.
Battery indicators Battery status Action
The screen is blank, or
displays Put in charger
and ashes.
The battery has no or very little
charge. The handset cannot
be used.
Charge without interruption
(at least 30 minutes).
The screen displays
Low battery and ashes.
The battery has enough charge
to be used for a short time.
Charge without interruption
(about 30 minutes).
The screen displays
HANDSET X.
The battery is charged. To keep the battery
charged, place it in the
telephone base or charger
when not in use.
Handset overview
CID/ /VOLUME
Review the caller ID log when
the phone is not in use.
Decrease the listening volume
during a call or message
playback.
Scroll down while in a menu,
or in the directory, caller ID log
or redial list.
Move the cursor to the left
when entering numbers or
names.
•
•
•
•
/FLASH
Make or answer a call.
Answer another incoming
call during a call.
•
•
MUTE/DELETE
Mute the microphone during
a call.
Delete digits or characters
while using the dialing keys.
Silence the ringer temporarily
while the handset is ringing.
Delete the displayed entry
while in the directory, caller ID
log or redial list.
•
•
•
•
/ /VOLUME
Review the directory when
the phone is not in use.
Increase the listening volume
during a call or message
playback.
Scroll up while in a menu, or
in the directory, caller ID log
or redial list.
Move the cursor to the right
when entering numbers or
names.
•
•
•
•
MENU/SELECT
Show the menu.
While in a menu, press to
select an item, or save an
entry or setting.
•
•
OFF/CANCEL
Hang up a call.
Silence the ringer temporarily
while the handset is ringing.
Press and hold to erase the
missed call indicator while the
phone is not in use.
Press to return to the previous
menu, or press and hold to
return to idle mode, without
making changes.
•
•
•
•
REDIAL/PAUSE
Press repeatedly to review
the redial list.
Press and hold to insert a
dialing pause while dialing
or entering a number.
•
•
QUIET#
Press and hold to set and turn
on the quiet mode, or turn it off.
Press repeatedly to show other
dialing options when reviewing
a caller ID log entry.
•
•
INT
Start an intercom conversation
or transfer a call.
•
Dialing keys
Enter numbers or characters.
Answer an incoming call.
•
•
TONE
Switch to tone dialing
temporarily during a call.
•
Make or answer a call using
the handset speakerphone.
During a call, press to switch
between the speakerphone and
the handset.
•
•
1
Press repeatedly to add
or remove 1 in front of
the caller ID log entry
before dialing or saving
it to the directory.
Press and hold to set or
dial your voicemail number.
•
•