User`s manual

2
Getting started
Telephone base and charger installation
Install the telephone base and charger as shown below.
Make sure that the electrical outlet is not controlled by a wall switch.
If you subscribe to digital subscriber line (DSL) high-speed Internet service through
your telephone line, you must install a DSL lter between the telephone line cord
and telephone wall jack. The lter prevents noise and caller ID problems caused
by DSL interference. Contact your DSL service provider for more information about
DSL lters.
CAUTION: If you subscribe to telephone service from a cable company or a VoIP
service provider, contact your service provider for more information.
Use only the power adapters and batteries supplied with this product. To order a
replacement, visit our website at www.vtechphones.com or call
1 [phone]. In Canada, go to www.vtechcanada.com or call
1 [phone].
The power adapters are intended to be correctly oriented in a vertical or floor
mount position. The prongs are not designed to hold the plug in place if it is
plugged into a ceiling, under-the-table or cabinet outlet.
•
•
Telephone base
Telephone line
cord
Electrical outlet (not
controlled by a wall
switch)
Telephone
wall jack
A DSL lter (not
included) is required
if you have DSL
high-speed Internet
service.
The DSL lter must
be plugged into the
telephone wall jack.
Telephone base
power adapter
Charger
Charger
adapter