User`s manual

25
Retrieve voicemail from
telephone service
Voicemail is a feature available from
most telephone service providers. It may
be included with your telephone service,
or may be optional. Fees may apply.
Retrieve voicemail
When you received a voicemail, the
handset displays
and New voicemail.
To retrieve, you typically dial an access
number provided by your telephone
service provider, and then enter a
security code. Contact your telephone
service provider for instructions on how
to configure the voicemail settings and
listen to messages.
NOTE
! After you have listened to all new
voicemail messages, the indicators on the
handset turn off automatically.
Turn off the new voicemail
indicators
If you have retrieved your voicemail while
away from home, and the handset still
displays the new voicemail indicators,
use this feature to turn off the indicators.
NOTE
! This feature turns off the indicators only, it
does not delete your voicemail messages.
1. Press MENU when the phone is not
in use.
2. Press ! or to choose Settings
and then press SELECT.
3. Press ! or to choose Clr
voicemail and then press SELECT.
4. The screen displays Reset VM
Icon?. Press SELECT to confirm.
You hear a confirmation tone.
Register a handset
When your handset is deregistered from
the telephone base, follow the steps
below to register it back to the telephone
base.
1. Remove the handset from the
telephone base.
2. Press and hold
/FIND HANDSET
at the telephone base for about four
seconds until the IN USE light turns
on.
3. Then press # on the handset. It
displays Registering...
The handset show Registered and
you hear a beep when the registration
process completes. The registration
process takes about 60 seconds to
complete.