User`s manual

20
Set number of rings
You can set the answering system to
answer an incoming call after two, three,
four, five or six rings; or toll saver.
If you choose toll saver, the answering
system answers a call after two rings
when you have new messages, or
after four rings when you have no new
messages. This enables you to check
for new messages and avoid paying
unnecessary long distance charges if
you are calling from outside your local
area.
1. Press MENU when the phone is not
in use.
2. Press ! or to choose Answering
sys and then press SELECT.
3. Press ! or to choose Ans sys
setup and then press SELECT.
4. Press ! or to choose # of rings
and then press SELECT.
5. Press ! or to choose 6, 5, 4,
3, 2 or Toll saver and then press
SELECT to save. You hear a
confirmation tone.
Set recording time
You can set the recording time for each
incoming message.
1. Press MENU when the phone is not
in use.
2. Press ! or to choose Answering
sys and then press SELECT.
3. Press ! or to choose Ans sys
setup and then press SELECT.
4. Press ! or to choose Recording
time and then press SELECT.
5. Press ! or to choose 3 minutes,
2 minutes or 1 minute, and then
press SELECT to save. You hear a
confirmation tone.
Turn the call screening on or off
You can hear incoming messages at
the telephone base while they are being
recorded.
1. Press MENU when the phone is not
in use.
2. Press ! or to choose Answering
sys and then press SELECT.
3. Press ! or to choose Ans sys
setup and then press SELECT.
4. Press SELECT to select Call
screening.
5. Press ! or to choose On or Off,
and then press SELECT to save.
You hear a confirmation tone.
Turn the message alert tone on
or off
When the message alert tone is set
to on, and there is at least one new
message, the telephone base beeps
every
10 seconds.
1. Press MENU when the phone is not
in use.
2. Press ! or to choose Answering
sys and then press SELECT.
3. Press ! or to choose Ans sys
setup and then press SELECT.
4. Press ! or to choose Msg alert
tone, and then press SELECT.
5. Press ! or to choose On or Off,
and then press SELECT to save.
You hear a confirmation tone.
NOTES
! The answering system must be turned on
for the message alert tone to be functional.
! Press any key on the telephone base
(except
/FIND HANDSET) to temporarily
silence the message alert tone.