User`s manual

5
Charge the battery
Place the handset in the telephone
base or the charger to charge.
Once you have installed the battery,
the handset LCD display indicates the
battery status (see the following table).
NOTES
! For best performance, keep the handset
in the telephone base or charger when not
in use.
! The battery is fully charged after 16 hours
of continuous charging.
! If you place the handset in the telephone
base or the charger without plugging in the
battery, the screen displays No battery.
Battery
indicators
Battery
status
Action
The screen
is blank, or
displays Put
in charger
and
flashes.
The battery
has no or
very little
charge. The
handset
cannot be
used.
Charge
without
interruption
(at least 30
minutes).
The screen
displays
Low battery
and
flashes.
The battery
has enough
charge to
be used for
a short time.
Charge
without
interruption
(about 30
minutes).
The screen
displays
HANDSET X.
The battery
is charged.
To keep
the battery
charged,
place it in the
telephone
base or
charger when
not in use.
When the battery is fully charged, you
can expect the following performance:
Operation
Operating
time
While in use (talking*) Seven hours
While not in use (standby**) Five days
* Operating times vary depending on your
actual use and the age of the battery.
** Handset is not charging nor in use.