User`s manual

7
To delete a directory entry:
When the desired entry displays, press DELETE.
When the screen displays Delete contact?, press SELECT.
Caller ID
This product supports caller ID services provided by most telephone service
providers. Depending on your service subscription, you may see the caller’s name,
number, date and time of calls that are sent by your telephone service provider
after the rst or second ring.
Call log
The call log stores up to 30 entries. If you answer a call before the caller
information appears, it will not be saved in the call log.
The handset displays XX missed calls when there are calls that have not
been reviewed in the call log.
If you want to erase the missed call indicator, press and hold CANCEL on the
idle handset.
To review and dial a number in the call log:
Press CID when the handset is not in use.
Scroll to browse through the call log. When the desired entry appears:
Press # repeatedly to show different dialing options.
Press 1 repeatedly if you need to add or remove 1 in front of the
telephone number.
Press to dial.
To save a call log entry to the directory:
When the desired call log entry displays, press SELECT.
Use the dialing keys to modify the number, if necessary. Then press SELECT.
Use the dialing keys to modify the name, if necessary. Then press SELECT.
To delete call log entries:
Delete an entry: When the desired call log entry displays, press DELETE.
Delete all entries: Press MENU when the handset is not in use. Scroll
to Call log and then press SELECT. Scroll to Del all calls then press
SELECT twice.
Answering system settings
Default settings are indicated by asterisks (*).
Screen display Function Options
Call screening Set whether you hear the callers while they are
leaving messages to you.
On*
Off
# of rings Set the number of times the telephone rings
before the answering system answers. Toll
saver allows you to check for new messages
and avoid paying unnecessary long distance
charges when you are not calling from your
local area.
6
5
4*
3
2
Toll saver
Remote code Set a two-digit security code to access the
answering system remotely from any
touch-tone telephone.
19*
Msg alert tone Set whether the telephone beeps every 10
seconds to alert you of new messages.
On
Off*
Recording time Set the recording time for each incoming
message.
3*
2
1
Voice language Set the voice prompt language in your
answering system.
English*
Français
Number of rings
You can set the answering system to answer an incoming call after 2, 3, 4, 5 or 6
rings; or toll saver. If you choose toll saver, the answering system answers a call
after 2 rings when you have new messages, and after 4 rings when you have no
new messages.
Press MENU when the handset is not in use.
Scroll to Answering sys and then press SELECT.
Scroll to Ans sys setup and then press SELECT.
Scroll to # of rings and then press SELECT.
Press CID or to choose 6, 5, 4, 3, 2 or Toll saver and then press SELECT
to save.
1.
2.
•
•
1.
2.
•
•
3.
1.
2.
3.
•
•
1.
2.
3.
4.
5.