User`s manual

6
Redial
The telephone stores the ve most recently dialed numbers. When there are
already ve entries, the oldest entry is deleted to make room for the new entry.
To review and dial a number from the redial list:
Press REDIAL when the handset is not in use.
Press CID, or REDIAL repeatedly until the desired entry displays.
Press to dial.
To delete a redial entry:
When the desired redial entry displays, press DELETE.
Chain dialing
Use this feature to initiate a dialing sequence from numbers stored in the directory,
call log or redial list while you are on a call. Chain dialing can be useful if you wish
to access other numbers (such as bank account numbers or access codes) from the
directory, call log or redial list.
To access a number in the directory, call log or redial list while on a call:
To enter the directory, press MENU twice.
-OR-
To enter the call log, press MENU then scroll to Call log then press SELECT.
-OR-
To enter the redial list, press REDIAL.
Scroll to the desired entry.
Press SELECT to dial the displayed number.
Find handset
Use this feature to nd all system handsets.
To start paging:
Press /FIND HANDSET on the telephone base once and then release when the
phone is not in use. The idle handset rings and
**
Paging
**
ashes on the screens.
To end paging:
Press /FIND HANDSET on the telephone base once and then release.
-OR-
Press or any of the dialing keys on the handset to stop the paging tone.
Do not press and hold /FIND HANDSET for more than four seconds. It may
lead to handset deregistration. If Not registered displays on the handset, refer to
Troubleshooting to register the handset to the telephone base.
Directory
The directory can store up to 30 entries.
To add a directory entry:
Press MENU three times when the handset is not in use.
Use the dialing keys to enter the number (up to 30 digits).
-OR-
Copy a number from the redial list by pressing REDIAL and then press
CID, or REDIAL repeatedly to select a number. Press SELECT to copy
the number.
Press SELECT to move to the name.
Use the dialing keys to enter the name (up to 15 characters). Additional key
presses show other characters of that particular key.
Press SELECT to store the entry.
While entering names and numbers, you can:
Press DELETE to backspace and erase a digit or character.
Press and hold DELETE to erase the entire entry.
Press CID or to move the cursor to the left or right.
Press and hold PAUSE to insert a dialing pause.
Press 0 to add a space.
To review and dial a number from the directory:
Entries are sorted alphabetically.
Press when the handset is not in use.
Scroll to browse through the directory, or use the dialing keys to start a
name search.
When the desired entry appears, press to dial.
To edit a directory entry:
When the desired entry displays, press SELECT.
Use the dialing keys to edit the number, then press SELECT.
Use the dialing keys to edit the name, then press SELECT to conrm.
1.
2.
3.
1.
2.
3.
•
•
•
1.
2.
3.
4.
5.
•
•
•
•
•
1.
2.
3.
1.
2.
3.