User`s manual

ManualsBrandsVTech ManualsAnswering MachineCS6124-21

User’s manual (Canada version)

CS6124/CS6124-11/

CS6124-2/CS6124-21/

CS6124-31

DECT 6.0 cordless telephone

Introduction

To help protect the environment, this user’s manual provides you with the basic

installation and use instructions. A limited set of features are described in

abbreviated form.

Please refer to the complete online user’s manual for a full set of installation and

operation instructions at www.vtechcanada.com.

Before using this VTech product, please read Important safety instructions on

page 11 of this user’s manual.

Table of contents

Parts checklist

Your telephone package contains the following items. Save your sales receipt and

original packaging in the event warranty service is necessary.

Parts checklist ...............................1

Telephone base and charger

installation ..................................2

Wall mounting (optional) ...............2

Battery installation ........................2

Battery charging ............................3

Handset overview..........................3

Telephone base overview .............4

Using the menu .............................4

Telephone settings ........................4

Telephone operation .....................5

Directory ........................................6

Caller ID ........................................7

Call log ..........................................7

Answering system settings ...........7

About answering system and

voicemail ....................................8

Answering system operation .........8

Troubleshooting .............................9

Important safety instructions .........11

Precautions for users of implanted

cardiac pacemakers ..................11

Operating range ............................11

Maintenance ..................................12

About cordless telephones ...........12

The RBRC

seal ............................12

Limited warranty ............................12

FCC, ACTA and IC regulations .....13

Technical specications ................14

Battery

(1 for CS6124/

CS6124-11)

(2 for CS6124-2/

CS6124-21)

(3 for CS6124-31)

User’s manual

Telephone base

power adapter

Telephone

line cord

Handset

(1 for CS6124/

CS6124-11)

(2 for CS6124-2/

CS6124-21)

(3 for CS6124-31)

Telephone base

Battery compartment

cover

(1 for CS6124/

CS6124-11)

(2 for CS6124-2/

CS6124-21)

(3 for CS6124-31)

Charger and

charger adapter

(1 for CS6124-2/

CS6124-21)

(2 for CS6124-31)

Quick start guide

Summary of content (14 pages)

PAGE 1
User’s manual (Canada version) CS6124/CS6124-11/ CS6124-2/CS6124-21/ CS6124-31 DECT 6.0 cordless telephone Introduction To help protect the environment, this user’s manual provides you with the basic installation and use instructions. A limited set of features are described in abbreviated form. Please refer to the complete online user’s manual for a full set of installation and operation instructions at www.vtechcanada.com.
PAGE 2
Telephone base and charger installation Install the telephone base as shown below. Electrical outlet (not controlled by a wall switch) Telephone wall jack A DSL filter (not included) is required if you have DSL high-speed Internet service Telephone base power adapter Charger adapter Telephone line cord Telephone base Charger • Use only the power adapter and battery supplied with this product. To order a replacement, visit our website at www.vtechcanada.com or call 1 (800) 267-7377.
PAGE 3
Battery charging Once you have installed the battery, the screen indicates the battery status (see the table below). For best performance, keep the handset in the telephone base or charger when not in use. The battery is fully charged after 16 hours of continuous charging. Refer to the online user’s manual for battery operating times. Battery indicators Battery status Action The screen is blank, or displays Place in charger and flashes. Battery has very little or no charge. The handset cannot be used.
PAGE 4
Telephone base overview Message window X/DELETE Shows the number of messages and other answering system information. Delete the message currently playing. Press twice to delete all old messages when the phone is not in use. /SKIP Skip to the next message. /REPEAT /PLAY/STOP Repeat the message or press twice to play the previous message. Play messages. Stop message playback. /FIND HANDSET Press once and then release to page all system handsets. /ANS ON/OFF Turn the answering system on or off.
PAGE 5
The following are some of the telephone features you may wish to set. Refer to Telephone settings in the online user’s manual for detailed instructions on setting all telephone features. Ringer volume You can adjust the ringer volume level, or turn the ringer off. . Press MENU when the handset is not in use. 2. Scroll to Ringers and then press SELECT twice. 3. Press VOL- or VOL+ to sample each volume level. 4. Press SELECT to save. • If the ringer volume is set to Off, the idle screen displays Ringer off.
PAGE 6
Redial The telephone stores the five most recently dialed numbers. When there are already five entries, the oldest entry is deleted to make room for the new entry. To review and dial a number from the redial list: . Press REDIAL when the handset is not in use. 2. Press CID, or REDIAL repeatedly until the desired entry displays. 3. Press to dial. To delete a redial entry: When the desired redial entry displays, press DELETE.
PAGE 7
To delete a directory entry: . When the desired entry displays, press DELETE. 2. When the screen displays Delete contact?, press SELECT. Caller ID This product supports caller ID services provided by most telephone service providers. Depending on your service subscription, you may see the caller’s name, number, date and time of calls that are sent by your telephone service provider after the first or second ring. Call log The call log stores up to 30 entries.
PAGE 8
About answering system and voicemail Your telephone has separate indicators for two different types of voice messages: those left on the built-in answering system and those left at your telephone service provider’s voicemail. Each alerts you to new messages differently. • If and XX new messages display on the handset and the message window on the telephone base flashes, there are messages recorded on the built-in answering system.
PAGE 9
Access the answering system remotely . Dial your telephone number from any touch-tone telephone. 2. When the system plays your announcement, enter the two-digit remote code. The preset code is 19. 3. Then you can enter one of the following remote commands. Command 1 2 3 33 4 44 5 *5 6 *7 8 0 Function Play all messages. Play only new messages. Delete the current message (during playback). Delete all old messages. Repeat the current message (during playback). Skip to the previous message (during playback).
PAGE 10
• If the battery is completely depleted, it may take up to 30 minutes to charge the handset before Low battery appears on the screen. • Purchase a new battery. Refer to Battery installation on page 2. The CHARGE light is off. • Clean the charging contacts on the handset and telephone base each month with a pencil eraser or a dry non-abrasive fabric. • Make sure the power adapter and telephone line cord are plugged in correctly and securely. • Unplug the power adapter.
PAGE 11
• Make sure to plug your USB telephone adapter into a dedicated USB port on your computer. Do not plug into a multiple port USB hub (USB splitter) that is not powered. • In a few rare instances, the USB port on your computer may not have enough power. In these instances, try using a USB hub with its own external power supply. • If you are using a firewall, it may prevent access to your nontraditional telephone service. Contact your service provider for more information.
PAGE 12
Maintenance Taking care of your telephone Your cordless telephone contains sophisticated electronic parts, so it must be treated with care. Avoid rough treatment Place the handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it. Avoid water Your telephone can be damaged if it gets wet. Do not use the handset outdoors in the rain, or handle it with wet hands. Do not install the telephone base near a sink, bathtub or shower.
PAGE 13
6. Product purchased, used, serviced, or shipped for repair from outside the United States of America or Canada, or used for commercial or institutional purposes (including but not limited to Products used for rental purposes); or 7. Product returned without a valid proof of purchase (see item 2 below); or 8. Charges for installation or set up, adjustment of customer controls, and installation or repair of systems outside the unit.
PAGE 14
Industry Canada Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference, including interference that may cause undesired operation. The term ‘’IC:‘’ before the certification/registration number only signifies that the Industry Canada technical specifications were met. The Ringer Equivalence Number (REN) for this terminal equipment is 0.1.