User`s manual

3
Battery charging
Once you have installed the battery, the screen indicates the battery status (see
the table below). For best performance, keep the handset in the telephone base or
charger when not in use. The battery is fully charged after 16 hours of continuous
charging. Refer to the online user’s manual for battery operating times.
Battery indicators Battery status Action
The screen is blank,
or displays Place in
charger and ashes.
Battery has very little or no
charge. The handset cannot
be used.
Charge without interruption
(at least 30 minutes).
The screen displays Low
battery and ashes.
Battery has enough charge to
be used for a short time.
Charge without interruption
(about 30 minutes).
The screen displays
HANDSET 1 and
--:-- --/--.
Battery is charged. To keep the battery charged,
place it in the telephone base
when not in use.
If you place the handset in the telephone base or charger without plugging in the
battery, the screen displays No battery.
Wall mounting (optional)
Your telephone comes ready for tabletop use.
To mount your telephone on the wall:
Position the top hole at the back of
the telephone base against the top
mounting stud [A].
Slide the telephone base down
on the mounting studs [A] and
[B] until it locks into place.
1.
2.
Telephone base
[A]
[B]
Mounting
studs
Handset overview
CID/VOL
-
Review the call log when the
telephone is not in use.
Decrease the listening
volume during a call.
Scroll down while in
a menu.
Move the cursor to the left
when entering numbers or
names.
/FLASH
Make or answer a call.
Answer another incoming
call during a call.
MUTE/DELETE
Mute the microphone during
a call.
Delete digits or characters while
using the dialing keys.
Silence the ringer temporarily
while the handset is ringing.
Delete the displayed entry
while in the directory, call log or
redial list.
CHARGE light
On when the handset
is charging.
TONE
Switch to tone dialing
temporarily during a call.
CANCEL
Dialing keys
Enter numbers or
characters.
/VOL
+
Review the directory when
the telephone is not in use.
Increase the listening volume
during a call.
Scroll up while in a menu.
Move the cursor to the right
when entering numbers
or names.
MENU/SELECT
S how the menu.
Select an item or save a
setting while in a menu.
OFF/CANCEL
Hang up a call.
Silence the ringer
temporarily while the handset
is ringing.
Press and hold to erase the
missed call indicator while
the telephone is not in use.
Return to the previous menu
while in a menu.
Press and hold to return to
idle mode while in a menu.
Delete digits while predialing.
REDIAL/PAUSE
Press repeatedly to review
the redial list.
Press and hold to insert a
dialing pause while dialing or
entering numbers.
#
Press repeatedly to show
other dialing options when
reviewing a call log entry .
1
Press repeatedly to add or
remove 1 in front of the call
log entry before dialing or
saving it to the directory.