User`s manual
29
PHONE SETTINGS
Press then
p
q
to select BS SETTINGS.
Press then
p
q
to select CHANGE PIN.
Press .
Enter the old system PIN.
Press then enter the new system PIN.
Press then enter the new system PIN again.
NOTE
If the new PIN entered in Step 6 is not matched with the new system PIN entered in
Step 5, you are requested to enter the valid system PIN again in Step 5.
Press to conrm the setting.
6.4 Reset Your Phone
You can reset your phone to the default settings. After reset, all your personal settings,
call list entries and redial list entries will be deleted, but your phonebook remains
unchanged.
Press then
p
q
to select DEFAULT.
Press .
Enter the 4-digit system PIN.
Press to conrm. The display shows “CONFIRM?” .
Press to re-conrm.
6.5 Registration
Your handset and base station is pre-registered.
If for some reason, the handset is not registered to the base station, “REGISTER” will
be displayed on the handset screen, register your handset according to the following
procedure.
6.5.1 Easy Registration for Additional Handset
Press and hold on the base until the IN USE LED starts ashing.
Put the unregistered handset on the base cradle. The display will show “PLEASE
WAIT”.
The handset will return to idle mode if the registration is successful. Repeat the
above steps if registration is failed, or try to register through the handset menu, as
instructed below.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
5.
1.
2.
3.