User`s manual
28
6.2.5 Set Alert Tones
A single beep is emitted when you press a key. You can turn on or off the key tone. You
can also turn on the alert tones when low battery and out of range are detected. Low
battery tone will be emitted while you are talking with the phone to alert you that you
need to charge up your battery.
Press then
p
q
to select HS SETTINGS.
Press then
p
q
to select TONE SETUP.
Press then
p
q
to select KEY TONE, BATTERY TONE or OUT OF RANGE.
Press then
p
q
to turn on or off these tones.
Press to conrm the setting.
6.2.6 Rename the Handset
Press then
p
q
to select HS SETTINGS.
Press then
p
q
to select RENAME HS.
Press then enter the name of your handset.
Press to conrm the setting.
6.2.7 Set the AUTO Answer
Press then
p
q
to select HS SETTINGS.
Press then
p
q
to select AUTO ANSWER.
Press then
p
q
to turn on or off the auto answer feature.
Press to conrm the setting.
6.3 Base Settings
6.3.1 Set the Flash Time
The default ash time is best suitable for your country and network operator. It is unlikely
that you should need to change this setting unless advised to do so.
Press then
p
q
to select BS SETTINGS.
Press then
p
q
to select DIAL MODE.
Press then
p
q
to select SHORT, MEDIUM or LONG.
Press to conrm the setting.
6.3.2 Change the System PIN Code
A 4-digit system PIN code is used for changing the system settings of the base station.
It is used to protect your phone against unauthorized use. The default system PIN code
is 0000.
1.
2.
3.
4.
5.
1.
2.
3.
4.
1.
2.
3.
4.
1.
2.
3.
4.