User`s manual

6.2 Handset Settings

6.2.1 Alarm

You can use this phone to set an alarm clock. When the alarm time is reached, “ALARM

ON” will ash on the display ringing with the alarm melody for around 45 seconds.

NOTES

You can press any key to disable the alarm. If however the snooze function is

activated, the alarm will sound again at the end of the snooze period of seven

minutes until you go into alarm settings and turn it off.

Key press is still applicable if handset keypad is locked and when the alarm time is

reached.

The alarm volume level is the same as the settings of the handset ringer volume. If

the handset ringer is set to VOLUME OFF, the alarm still sounds at VOLUME 1 level.

During an external call or an internal call, if an alarm is set and when the alarm

time is reached, “ALARM ON” will still ash. An alarm tone will be emitted from the

earpiece to notify you the alarm time is reached. Once you press any key or press

and hold to disable the alarm, it will revert to the call duration screen.

During paging or ringing, the alarm will not sound when the alarm time is reached.

However, if snooze function is enabled, the alarm will sound again at the end of

the snooze period provided that it’s not ringing or in paging mode at the end of the

snooze period.

1. Press then

to select HS SETTINGS.

2. Press then

to select ALARM.

3. Press then

to select ON or OFF.

If ON is selected:

Press then use the keypad to enter the time.

Press then

to select AM or PM .

Press to conrm. The display shows the current time and date, and you are

prompted to set the snooze function.

Press then

to select ON or OFF.

Press to conrm the settings.

•