User`s manual
19
USE YOUR PHONE
NOTES
If OFF is selected, Power Fail Back-Up mode will not be enabled.
If AUTO is selected, the registered handset(s) will display “PUT IN CRADLE TO
PWR UP BS” when mains power interruption occurs. Place the handset with
sufcient battery power (not lower than level 2) onto the main base unit to activate
Power Fail Back-Up and start up the base. If handset is already on the main base
unit it will automatically activate the Power Fail Back-Up mode (if it has sufcient
battery power) and start up the base.
If MANUAL is selected, the registered handset(s) will display “TO PWR UP BS
PRESS TALK OFF” when mains power interruption occurs. Press and then
place the handset onto the main base unit to activate the Power Fail Back-Up mode
and start up the base.
If a handset is already on the main base unit, just press .
Power Fail Back-Up mode will not work if the handset battery power is not sufcient
(not lower than level 2).
Do not pick up the power supplying handset from base when Power Fail Back-Up
mode is activated.
Do not touch the charging contacts of the power supplying handset during Power
Fail Back-Up mode.
In power failure back-up mode none of the base functions and your cordless phone
will operate.
It may take up to 90 seconds to transition through the power failure back-up
activation process as the base and handset(s) synchronize with each other.
4.13.2 Make a Call Using Power Fail Back-Up Mode
If there is only one handset registered to the base:
Once the handset is placed onto the main base unit, enter the telephone number,
and then press . The speakerphone will be turned on automatically and call is
made.
OR
Lift up the handset and enter the telephone number.
Place the handset back onto the main base unit within 60 seconds.
The speakerphone will be turned on automatically and call is made.
Handset may show “PLEASE WAIT...” whilst the handset starts up the base
before dialing.
To end the call, press .
If there is more than one handset registered to the base, the handset on the main
base unit should be left as a power supply of the base and you can use the other
handset(s) to make calls like normal.
NOTE
The handset should always remain on the main base unit for the entire length of the call.
•
•
•
•
•
•
•
•
1.
1.
2.
3.