User`s manual

15
USE YOUR PHONE
4.2.5 Call from the Call List
In idle mode, press to access the call list.
OR
Press to access CALL LIST. Press again.
NOTE
The rst entry in the call list will be displayed. If there is no entry in the call list, it will
show “EMPTY”.
Press then
p
q
to select the desired call list.
Press to dial the number.
4.2.6 Call from the Redial List
Press to access the redial list and press
p
q
to select the desired redial
number. Press to dial the selected redial number.
4.2.7 Out of Range Warning
When the handset goes out of range of the base, an audible alert tone will be emitted,
and the call will be disconnected if you are on a call. When you move back within
range, the handset will automatically reconnect to the base.
4.3 Answer a Call
If the handset is not on the charging cradle:
When the phone rings, press to answer a call.
If the handset is on the charging cradle or the base station and if AUTO ANSWER is
set to ON:
When the phone rings, pick up the handset to answer a call.
If you wish to switch AUTO ANSWER Off, see page 27. The default setting is ON.
4.3.1 Answer a Call in Handsfree Mode
Handsfree lets you talk to your caller without holding the handset to your ear. It also
enables other people in the room to join in the conversation over the loudspeaker.
When the phone rings, press then press again. The call will be transferred
to the handset loudspeaker.
Press to switch between the earpiece and loudspeaker.
WARNING
Switching on handsfree mode can suddenly increase the volume in the earpiece to a
very high level. Make sure the handset is not too close to your ear.
1.
2.
3.
1.
2.