User`s manual
7
SET UP THE TELEPHONE
2.6 Wall Mounting
Your CS6114,CS6114-2 is designed to mount on a standard wall mounting plate. Refer
to the steps below to wall mount your CS6114,CS6114-2 cordless phone:
Plug the provided line cord and the power cable to the socket at the bottom of the
base respectively.
Thread the line cord and power cable through the corresponding slot. Plug the
other end of the line cord and the power cable into the telephone wall socket and
the power socket respectively.
Place the cordless phone over the two retaining screws of your standard wall
mount plate as indicated. Slide the phone downward into position.
WARNING
Do not place your CS6114,CS6114-2 in the bathroom or other humid areas.
1.
2.
3.
If you have ADSL high
speed Internet service, an
ADSL î‚¿lter (not included) is
required.