User`s manual
24
Telephone operation
Speed dial
Your can store up to nine telephone numbers with names (up to 15 characters and 24 digits in each location) in the
speed dial locations you assign in the handset.
Store a speed dial entry
Press PROG when the handset is not in use.
Press CID/VOL- or /VOL+ until the screen displays SPEED DIAL.
Press SELECT and the screen shows ENTER 1-9.
Press a key (1 through 9) to assign the speed dial location to store this number. The screen shows
ENTER NAME.
Use the dialing keys (0-9) to enter the name (see Character chart on page 20).
Press CID/VOL- to move the cursor to the left or /VOL+ to the right.
Press CHAN/REMOVE to erase a character.
Press SELECT or PROG to move to the telephone number and the screen shows ENTER NUMBER.
Use the dialing keys (0-9) to enter the telephone number.
Press CID/VOL- to move the cursor to the left or /VOL+ to the right.
Press CHAN/REMOVE to erase a digit.
Press REDIAL/PAUSE to insert a dialing pause (a P appears).
Press SELECT or PROG to conrm. You will hear a conrmation tone.
1.
2.
3.
4.
•
•
•
5.
•
•
•
•
6.
The entries stored in the speed dial memory are numbered 01 to 09 and share the memory in the directory.
Press OFF at any time to exit speed dial mode.
If the location is occupied, the new entry replaces the old entry and the old entry is moved to a directory location.
•
•
•