User`s manual
11
Telephone settings
Ringer volume (continued)
When the handset is not in use, press and hold CID/VOL- or /VOL+ until the screen displays RINGER VOL:
and the current setting. The current setting ashes.
Press CID/VOL- or /VOL+ to adjust ringer volume from OFF, LOW or HI. You hear a sample of the selected
volume level as you scroll through the choices.
Press SELECT or PROG to save your selection. You will hear a conrmation tone.
Dial mode
If you have touch-tone service, the telephone is ready to use as soon as the battery is charged. If you have pulse
(rotary) service, you need to change the dial mode setting to pulse.
To change the setting:
Press PROG when the handset is not in use.
Press CID/VOL- or /VOL+ until the screen displays DIAL MODE: and the current setting, then
press SELECT. The current setting ashes.
Press CID/VOL- or /VOL+ to select TONE or PULSE.
Press SELECT or PROG to save your selection. You will hear a conrmation tone.
Press OFF to return to idle mode.
1.
2.
3.
1.
2.
3.
4.
5.
If the ringer volume is set to OFF, RINGER OFF is displayed on the idle screen.
When the ringer volume is set to OFF, the handset still rings when you press FIND HANDSET.
•
•