User`s manual
9
Set date and time
If you subscribe to caller ID service from your telephone service provider, the date and time are set automatically
with the next incoming call. If you do not have caller ID service, you can set the date and time manually.
To set the date and time:
Press PROG when the handset is not in use.
Press CID/VOL- or /VOL+ until the screen displays DATE/TIME, then press SELECT.
When the month is ashing, press CID/VOL- or /VOL+ until the screen displays the correct month and then
press SELECT or PROG.
When the date is ashing, press CID/VOL- or /VOL+ until the screen displays the correct date and then
press SELECT or PROG.
When the hour is ashing, press CID/VOL- or /VOL+ until the screen displays the correct hour and then
press SELECT or PROG.
When the minute is ashing, press CID/VOL- or /VOL+ until the screen displays the correct minute and then
press SELECT or PROG.
When AM or PM is ashing, press CID/VOL- or /VOL+ to select AM or PM. Press SELECT or PROG to save
your settings. You will hear a conrmation tone.
Press OFF to return to idle mode.
1.
2.
3.
4.
5.
6.
7.
8.
When there is a power failure or after battery replacement, the time needs to be reset.
Telephone settings