User`s manual

Assembly

For proper use of the VTech

Smarty’s Workshop™, make sure the unit

is assembled properly by an adult before use. Please follow the directions

below.

1. Before attaching Smarty to the

workbench, push the connecting wires

into the cavity on the workbench.

2. To position Smarty correctly, match the

posts under Smarty with the

corresponding holes on top of the

workbench.

3. When Smarty is positioned properly on the workbench, apply pressure

until he snaps tightly into place. This will permanently attach Smarty

to the workbench. Please do not attempt to remove Smarty from the

workbench, as this may cause damage to the unit.

Push the

connecting wires

into the cavity

Match the

smaller post

with the

small hole

Match the

bigger post

with the

big hole