Operating Instructions 87 77 SC-LX AV Receiver SC-LX
CAUTION TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. D3-4-2-1-1_B1_En WARNING This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture.
Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. 04 Basic Setup Automatically conducting optimum sound tuning (Full Auto MCACC)......................................................................45 The Input Setup menu.......................................................................................................................................................46 Operation Mode Setup.....................
10 Controlling the rest of your system 14 Additional information About the Remote Setup menu.......................................................................................................................................84 Operating multiple receivers............................................................................................................................................84 Setting the remote to control other components...............................................................
Flow of settings on the receiver 6 Flow for connecting and setting the receiver The unit is a full-fledged AV receiver equipped with an abundance of functions and terminals. It can be used easily after following the procedure below to make the connections and settings.
Before you start Checking what’s in the box............................................................................................................. 7 Notice in regards to the separately sold Bluetooth ADAPTER and wireless LAN converter...... 7 Our philosophy................................................................................................................................. 7 Features.............................................................................................................
01 Before you start % Checking what’s in the box Please check that you’ve received the following supplied accessories: ! Setup microphone (cable: 5 m) ! Remote control unit ! AAA size IEC R03 dry cell batteries (to confirm system operation) x2 ! AM loop antenna ! FM wire antenna ! Power cord ! CD-ROM (AVNavigator) ! Quick start guide ! Safety Brochure % % Bluetooth ADAPTER Wireless LAN Converter Model No.
01 % Before you start % HDZONE output This receiver supports output of the HDMI output to a subzone room. Powerful images can be enjoyed simply by connected this receiver to a TV supporting 4K/Full-HD/3D. In addition, a multi-channel environment can be created by connecting this receiver to another AV receiver in the subzone room.
01 Before you start Installing the receiver Operating range of remote control unit ! When installing this unit, make sure to put it on a level and stable surface. ! Don’t install it on the following places: — on a color TV (the screen may distort) — near a cassette deck (or close to a device that gives off a magnetic field). This may interfere with the sound.
01 Before you start Handling the CD-ROM Deleting the AVNavigator Operating Environment You can use the following method to uninstall (delete) the AVNavigator from your PC. % ! AVNavigator can be used with Microsoft® Windows® XP/Windows Vista®/Windows® 7/Windows® 8. ! A browser is at times used for AVNavigator functions. The supported browser is Microsoft Internet Explorer® 8, 9 or 10. ! Adobe® Flash® Player 10 must be installed to use some of the functions in AVNavigator. For details, see http://www.
Controls and displays Remote control............................................................................................................................... 12 Display.............................................................................................................................................14 Front panel......................................................................................................................................
02 Controls and displays The remote has been conveniently color-coded according to component control using the following system: ! White – Receiver control, TV control ! Blue – Other controls (See pages 51, 52, 54, 55 and 87.) Remote control This section explains how to operate the remote control for the receiver.
02 Controls and displays 10 MULTI-ZONE select buttons Switch to perform operations in ZONE 2, ZONE 3 and HDZONE (page 79). 11 Remote control LED Lights when a command is sent from the remote control. 12 Switches the remote to control the receiver (used to select the white commands). Switch to perform operations in the main zone. Also use this button to set up surround sound. 13 VOLUME +/– Use to set the listening volume.
02 Controls and displays 7 Display 1 AUTO HDMI DIGITAL ANALOG 2 L SL XL C XC LFE 3 1 17 4 5 6 7 8 9 10 11 12 13 14 MSTR CD TUNER PHONO iPod 18 19 20 DVD TV BD DVR VIDEO HDMI [2] 8 15 16 9 dB OVER Lights when excessive analog signals are being input. USB [3] [4] 10 PQLS Lights when the PQLS feature is active (page 72). 11 Tuner indicators 21 ! TUNED – Lights when a broadcast is being received. ! STEREO – Lights when a stereo FM broadcast is being received in auto stereo mode.
02 Controls and displays 7 Front panel Front panel controls To access the front panel controls, catch the sides of the door with your fingers and pull forward. 1 2 3 4 3 5 6 INPU SELET CTOR STAN DBY ADVANCED MCACC FL OFF HDMI /ON iPod iPhone iPad MAST VOLU ER ME 8 INPUT SELECTOR AUDIO PARAMETER Use to access the Audio options (page 75). MASTER VOLUME 9 i/j/k/l (TUNE/PRESET) /ENTER Use the arrow buttons when setting up your Home Menu.
Connecting your equipment Connecting your equipment.......................................................................................................... 17 Rear panel....................................................................................................................................... 17 Determining the speakers’ application......................................................................................... 18 Placing the speakers....................................................
03 Connecting your equipment SC-LX77 Connecting your equipment This receiver provides you with many connection possibilities, but it doesn’t have to be difficult. This chapter explains the kinds of components you can connect to make up your home theater system.
03 Connecting your equipment [B] 7.2 channel surround system & Speaker B connection Determining the speakers’ application ! Speaker System setting: 7.1ch + Speaker B This unit is equipped with speaker terminals for 11 channels, allowing users to select a variety of speaker layouts/ usage patterns according to their tastes. The terminals to which the speakers should be connected differ according to the speaker layout/usage pattern. Select one speaker layout/usage pattern before connecting the speakers.
03 Connecting your equipment [D] 7.2 channel surround system (Surround back) & ZONE 2 connection (Multi Zone) [F] 5.2 channel surround system & Front Bi-amping connection (High quality surround) & ZONE 2 connection (Multi Zone) ! Speaker System setting: 7.1ch + ZONE 2 With these connections you can simultaneously enjoy 7.2-channel surround sound in the main zone with stereo playback on another component in ZONE 2. (The selection of input devices is limited.) This speaker layout/usage pattern provides 7.
03 Connecting your equipment [H] 5.2 channel surround system & Speaker B Bi-amping connection [J] 5.2 channel surround system & Front and Center Bi-amping connection (High quality surround) ! Speaker System setting: 5.1ch + SP-B Bi-Amp With these connections you can simultaneously enjoy 5.2-channel surround sound in the main zone with stereo playback of the same sound on the B speakers. The B speakers can be bi-amped to achieve high quality sound.
03 Connecting your equipment Placing the speakers Connecting the speakers Refer to the chart below for placement of the speakers you intend to connect. Each speaker connection on the receiver comprises a positive (+) and negative (–) terminal. Make sure to match these up with the terminals on the speakers themselves. This unit supports speakers with a nominal impedance of 4 W to 16 W.
03 Connecting your equipment Bi-amping your speakers Bi-wiring your speakers Bi-amping is when you connect the high frequency driver and low frequency driver of your speakers to different amplifiers for better crossover performance. Your speakers must be bi-ampable to do this (having separate terminals for high and low) and the sound improvement will depend on the kind of speakers you’re using. Your speakers can also be bi-wired if they support bi-amping.
03 Connecting your equipment [B] 7.2 channel surround system & Speaker B connection Installing your speaker system At the very least, front left and right speakers only are necessary. Note that your main surround speakers should always be connected as a pair, but you can connect just one surround back speaker if you like (it must be connected to the left surround back terminal). ! Select ‘7.1ch + Speaker B’ from the Speaker System menu. See Speaker system setting on page 99 to do this.
03 Connecting your equipment [C] 7.2 channel surround system & Front Bi-amping connection (High quality surround) [D] 7.2 channel surround system (Surround back) & ZONE 2 connection (Multi Zone) ! Select ‘7.1ch Front Bi-Amp’ from the Speaker System menu. See Speaker system setting on page 99 to do this. ! When only connecting one surround back speaker, connect it to the SURROUND BACK L (Single) terminals. ! Select ‘7.1ch + ZONE 2’ from the Speaker System menu.
03 Connecting your equipment [E] 7.2 channel surround system (Front height/Front wide) & ZONE 2 connection (Multi Zone) [F] 5.2 channel surround system & Front Bi-amping connection (High quality surround) & ZONE 2 connection (Multi Zone) ! Select ‘7.1ch FH/FW + ZONE 2’ from the Speaker System menu. See Speaker system setting on page 99 to do this. ! Select ‘5.1ch Bi-Amp + ZONE 2’ from the Speaker System menu. See Speaker system setting on page 99 to do this.
03 Connecting your equipment [G-1] 5.2 channel surround system & ZONE 2/ZONE 3 connection (Multi Zone) [G-2] Multi-ZONE Music [H] 5.2 channel surround system & Speaker B Bi-amping connection ! Select ‘5.1ch + SP-B Bi-Amp’ from the Speaker System menu. See Speaker system setting on page 99 to do this. See Speaker system setting on page 99 to do this. ! [G-1] Speaker System setting: 5.
03 Connecting your equipment [I] 5.2 channel surround system & Front and Surround Bi-amping connection (High quality surround) [J] 5.2 channel surround system & Front and Center Bi-amping connection (High quality surround) ! Select ‘5.1ch F+Surr Bi-Amp’ from the Speaker System menu. See Speaker system setting on page 99 to do this. ! Select ‘5.1ch F+C Bi-Amp’ from the Speaker System menu. See Speaker system setting on page 99 to do this.
03 Connecting your equipment [K] 5.2 channel surround system & Center and Surround Bi-amping connection (High quality surround) About the audio connection Types of cables and terminals HDMI Sound signal priority ! Select ‘5.1ch C+Surr Bi-Amp’ from the Speaker System menu. See Speaker system setting on page 99 to do this.
03 Connecting your equipment About the video converter About HDMI The video converter ensures that all video sources are output through the HDMI OUT 1 and HDMI OUT 2 terminals. If the TV is only connected to the receiver’s composite VIDEO MONITOR OUT jacks, all the other video devices must be connected through composite connections.
03 Connecting your equipment — When the TV and receiver are connected by HDMI connections, if the TV supports the HDMI ARC (Audio Return Channel) function, the sound of the TV can be input to the receiver via the HDMI OUT 1 terminal, so there is no need to connect an audio cable. In this case, set ARC at HDMI Setup to ON (see HDMI Setup on page 71). After setting the ARC, some time may be required for the connected device to be recognized and the sound to be produced.
03 Connecting your equipment Connecting your DVD player with no HDMI output Connecting your TV with no HDMI input This diagram shows connections of a TV (with HDMI input) and DVD player (or other playback component with no HDMI output) to the receiver. This diagram shows connections of a TV (with no HDMI input) and DVD player (or other playback component) to the receiver. HDMI/DVI-compatible monitor DVD player, etc.
03 Connecting your equipment ! In order to listening to HD audio with this receiver, connect an HDMI cable, and use analog video cable for video signal input. Depending on the player, it may not be possible to output video signals to both HDMI and other video output (composite, etc.) simultaneously, and it may be necessary to make video output settings. Please refer to the operating instructions supplied with your player for more information.
03 Connecting your equipment ! If your HDD/DVD recorder, BD recorder, etc., is equipped with an HDMI output terminal, we recommend connecting it to the receiver’s HDMI DVR/BDR IN terminal. When doing so, also connect the receiver and TV by HDMI (see Connecting using HDMI on page 30). HDMI OUT HDD/DVD recorder, BD recorder, etc. Connecting a satellite/cable receiver or other set-top box Satellite and cable receivers, and terrestrial digital TV tuners are all examples of so-called ‘set-top boxes’.
03 Connecting your equipment ! Even if your set-top box is equipped with an HDMI output terminal, in some cases the sound is output from the digital audio output (optical or coaxial) and only the video is output from the HDMI output terminal. In this case, make the HDMI and digital audio connections as shown below. This receiver has both digital and analog inputs, allowing you to connect audio components for playback.
03 Connecting your equipment Connecting additional amplifiers Connecting the multichannel analog inputs This receiver has more than enough power for any home use, but it’s possible to add additional amplifiers to every channel of your system using the pre-outs. Make the connections shown below to add amplifiers to power your speakers. SC-LX87 only For your Blu-ray Disc player and DVD player may have 5.1, 6.1 or 7.
03 Connecting your equipment Connecting external antennas Connecting AM/FM antennas To improve FM reception, connect an external FM antenna to FM UNBAL 75 W. Connect the AM loop antenna and the FM wire antenna as shown below. To improve reception and sound quality, connect external antennas (see Connecting external antennas on page 36).
03 Connecting your equipment ! When any of the HDMI 4, HDMI 6, HDMI 7 or HDMI 8 inputs is selected in the main zone, it is only possible to select the same input as in the main zone for the HDZONE. (Inputs other than the ones listed here can be selected.) The same limitations apply when one of the above inputs is selected for the HDZONE. MULTI-ZONE setup This receiver can power up to four independent systems in separate rooms after you have made the proper MULTI-ZONE connections.
03 Connecting your equipment MULTI-ZONE setup using speaker terminals (ZONE 2) Secondary MULTI-ZONE setup (ZONE 3) Either the surround back or the front wide speaker terminals can be used as the speaker terminals for ZONE 2. For details, see Determining the speakers’ application on page 18. 1 1 Connect a pair of speakers to the surround back or front wide speaker terminals. 2 Connect a TV monitor to the VIDEO ZONE 2 OUT jack on this receiver.
03 Connecting your equipment MULTI-ZONE setup using HDMI terminal (HDZONE) Connecting to the network through LAN interface By connecting this receiver to the network via the LAN terminal, you can listen to Internet radio stations. To listen to Internet radio stations, you must sign a contract with an ISP (Internet Service Provider) beforehand. When connected in this way, you can play audio files stored on the components on the local network, including your computer.
03 Connecting your equipment % Switch the receiver into standby, and then use the iPod cable to connect your iPod to the iPod/iPhone/iPad terminal on the front panel of this receiver. Connecting optional Bluetooth ADAPTER ! For the cable connection, also refer to the operating instructions for your iPod. ! When connecting an iPhone to this unit, keep the iPhone at least 20 cm away from this unit.
03 Connecting your equipment Connecting a USB device Connecting an HDMI-equipped component to the front panel input It is possible to play audio and photo files by connecting USB devices to this receiver. iPod iPhone iPad DIRECT CONTROL with USB AUTO/ALC/ DIRECT 5V HOME THX BAND iPod iPhone iPad DIRECT CONTROL TUNER EDIT with USB HDMI 5 INPUT/ 0.9 A) MHL (5V 2.1 A USB mass storage device AUTO/ALC/ DIRECT 5V 2.1 A HOME THX BAND TUNER EDIT HDMI 5 INPUT/ 0.
03 Connecting your equipment Connecting an IR receiver Note If you keep your stereo components in a closed cabinet or shelving unit, or you wish to use the sub zone remote control in another zone, you can use an optional IR receiver (such as a Niles or Xantech unit) to control your system instead of the remote sensor on the front panel of this receiver. ! Remote operation may not be possible if direct light from a strong fluorescent lamp is shining on the IR receiver remote sensor window.
03 Connecting your equipment Switching components on and off using the 12 volt trigger You can connect components in your system (such as a screen or projector) to this receiver so that they switch on or off using 12 volt triggers when you select an input function. However, you must specify which input functions switch on the trigger using the The Input Setup menu on page 46. Note that this will only work with components that have a standby mode.
Basic Setup Automatically conducting optimum sound tuning (Full Auto MCACC)..................................... 45 The Input Setup menu.................................................................................................................... 46 Operation Mode Setup.................................................................................................................. 47 Changing the OSD display language (OSD Language)...............................................................
04 Basic Setup Install the microphone on a stable floor. Placing the microphone on any of the following surfaces may make accurate measurement impossible: ! Sofas or other soft surfaces. ! High places such as tabletops and sofa tops. The Full Auto MCACC display appears once the microphone is connected.
04 Basic Setup 1a.Full Auto MCACC 1a.Full Auto MCACC A/V RECEIVER Now Analyzing...
04 Basic Setup Input function default and possible settings Operation Mode Setup The terminals on the receiver generally correspond to the name of one of the input functions. If you have connected components to this receiver differently from (or in addition to) the defaults below, see The Input Setup menu on page 46 to tell the receiver how you’ve connected up. The dots (k) indicate possible assignments. Input function BD This receiver is equipped with a great number of functions and settings.
04 Basic Setup Operable settings/items Descriptions Page Changing the frequency step Other functions INPUT SELECT (INPUT SELECTOR) Switches the input. 50 VOLUME +/–, MUTE Use to set the listening volume. 50 LISTENING MODE Selects your favorite listening modes. 58 PQLS Plays using the PQLS function. 72 PHASE (Phase Control) Plays with phase shifting in the low range corrected.
Basic playback Playing a source.............................................................................................................................. 50 Playing an iPod............................................................................................................................... 51 Playing a USB device...................................................................................................................... 52 Playing an MHL-compatible device...............................
05 Basic playback The on-screen display is only displayed when this receiver’s HDMI OUT 1 or HDMI OUT 2 terminal is connected to the TV’s HDMI input terminal by HDMI cable. When connected to the TV with anything other than an HDMI cable, watch the front panel display when performing operations and making settings. Playing a source Here are the basic instructions for playing a source (such as a DVD disc) with your home theater system.
05 Basic playback Playing back audio files stored on an iPod Playing an iPod To navigate songs on your iPod, you can take advantage of the GUI screen of your TV connected to this receiver. You can also control all operations for music in the front panel display of this receiver. ! Note that characters that cannot be displayed on this receiver are displayed as #. ! This feature is not available for photos on your iPod.
05 Basic playback Playing back photo files stored on a USB memory device Playing a USB device ! Photo files cannot be played in the sub zone. It is possible to play files using the USB interface on the front of this receiver. ! Compatible USB devices include external magnetic hard drives, portable flash memory drives (particularly key drives) and digital audio players (MP3 players) of format FAT16/32.
05 Basic playback a “MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS and Thomson multimedia.” b Files encoded using Windows Media Codec 9 may be playable but some parts of the specification are not supported; specifically, Pro, Lossless, Voice. c Uncompressed FLAC files are not supported. Pioneer does not guarantee playback. d DSD files cannot be played in the sub zone. About playable file formats The USB function of this receiver supports the following file formats.
05 Basic playback Playing music from a computer Listening to the radio SC-LX87 only The following steps show you how to tune in to FM and AM radio broadcasts using the automatic (search) and manual (step) tuning functions. If you already know the frequency of the station you want, see Tuning directly to a station below. Once you are tuned to a station you can memorize the frequency for recall later-see Saving station presets on page 55 for more on how to do this.
05 Basic playback Saving station presets Bluetooth ADAPTER for Wireless Enjoyment of Music If you often listen to a particular radio station, it’s convenient to have the receiver store the frequency for easy recall whenever you want to listen to that station. This saves the effort of manually tuning in each time. This receiver can memorize up to 63 stations, stored in seven banks, or classes (A to G) of 9 stations each. 1 Tune to a station you want to memorize.
05 Basic playback Pairing the Bluetooth ADAPTER and Bluetooth wireless technology device Listening to music contents of a Bluetooth wireless technology device with your system “Pairing” must be done before you start playback of Bluetooth wireless technology content using the Bluetooth ADAPTER. Make sure to perform pairing the first time you operate the system or any time pairing data is cleared.
05 Basic playback Air Jam Air Jam - a Pioneer-exclusive application and available for free. Air Jam lets you connect multi compatible devices to this unit using Bluetooth wireless technology. With it, you can make a group playlist directly on a supported device to play in your home theater through the unit. You and your friends can add songs from your devices to the playlist. Also Air Jam lets you delete the song before anyone has to hear it.
Listening to your system Enjoying various types of playback using the listening modes................................................. 59 Selecting MCACC presets............................................................................................................... 61 Choosing the input signal.............................................................................................................. 61 Better sound using Phase Control.................................................................
06 Listening to your system With two channel sources, you can select from: ! 2 Pro Logic IIx MOVIE – Up to 7.1 channel sound (surround back), especially suited to movie sources ! 2 Pro Logic IIx MUSIC – Up to 7.1 channel sound (surround back), especially suited to music sources ! 2 Pro Logic IIx GAME – Up to 7.1 channel sound (surround back), especially suited to video games ! 2 PRO LOGIC – 4.1 channel surround sound (sound from the surround speakers is mono) ! 2 Pro Logic IIz HEIGHT – Up to 9.
06 Listening to your system Using the Home THX modes Using the Advanced surround effects THX and Home THX are technical standards created by THX Ltd. for cinema and home theater sound. Home THX is designed to make home theater audio sound more like what you hear in a cinema. Different THX options will be available depending on the source and the setting for surround back channel processing (see THX Audio Setting on page 101 for more on this).
06 Listening to your system Using Stream Direct Selecting MCACC presets Use the Stream Direct modes when you want to hear the truest possible reproduction of a source. All unnecessary signal processing is bypassed, and you’re left with the pure analog or digital sound source. Processing differs depending on the input signal and whether or not surround back speakers are connected. For details, see Auto Surround, ALC and Stream Direct with different input signal formats on page 123.
06 Listening to your system Better sound using Phase Control Better sound using Phase Control and Full Band Phase Control This receiver’s Phase Control feature uses phase correction measures to make sure your sound source arrives at the listening position in phase, preventing unwanted distortion and/or coloring of the sound. Phase Control technology provides coherent sound reproduction through the use of phase matching for an optimal sound image.
06 Listening to your system Using the Full Band Phase Control’s FRONT ALIGN function Full Band Phase Control calibrates frequency phase disturbances (group delay) for the full speaker band (Full Band) (SYMMETRY), but with this unit it is also possible to calibrate the frequency phase characteristics of other speakers to the frequency phase characteristics of the front speakers (FRONT ALIGN).
Playback with NETWORK features Introduction.................................................................................................................................... 65 Playback with Network functions................................................................................................. 66 About network playback............................................................................................................... 68 About playable file formats.....................................
07 Playback with NETWORK features Using AirPlay on iPod touch, iPhone, iPad, and iTunes Introduction AirPlay works with iPhone, iPad, and iPod touch with iOS 4.3.3 or later, Mac with OS X Mountain Lion, and Mac and PC with iTunes 10.2.2 or later. To use AirPlay, select your receiver on your iPod touch, iPhone, iPad or in iTunes. *1 The receiver’s input will switch automatically to AirPlay when AirPlay is in use.
07 Playback with NETWORK features 3 About HTC Connect Repeat step 2 to play back the desired song. For detailed operating instructions, refer to the section shown below. ! Internet radio stations – See Listening to Internet radio stations on page 66. ! Media server – See Playing back audio files stored on components on the network on page 67. ! Favorites – See Playing back your favorite songs on page 67.
07 Playback with NETWORK features Registering broadcast stations not on the vTuner list from the special Pioneer site Playing back your favorite songs With the receiver, broadcast stations not included on the list of station distributed by vTuner can be registered and played. Check the access code required for registration on the receiver, use this access code to access the special Pioneer Internet radio site and register the desired broadcast stations in your favorites.
07 Playback with NETWORK features About playback behavior over a network About network playback ! Playback may stall when the PC is switched off or any media files stored on it are deleted while playing content. ! If there are problems within the network environment (heavy network traffic, etc.) content may not be displayed or played properly (playback may be interrupted or stalled). For best performance, a 100BASE-TX connection between player and PC is recommended.
07 Playback with NETWORK features Category About playable file formats The NETWORK feature of this receiver supports the following file formats. Note that some file formats are not available for playback although they are listed as playable file formats. Also, the compatibility of file formats varies depending on the type of server. Check with your server to ensure the compatibility of file formats supported by your server.
Control with HDMI function About the Control with HDMI function........................................................................................ 71 Making Control with HDMI connections...................................................................................... 71 HDMI Setup..................................................................................................................................... 71 Before using synchronization........................................................
08 Control with HDMI function About the Control with HDMI function Synchronized operations below with a Control with HDMI-compatible Pioneer TV or Blu-ray Disc player are possible when the component is connected to the receiver using an HDMI cable. ! The receiver’s volume can be set and the sound can be muted using the TV’s remote control. ! The receiver’s input switches over automatically when the TV’s input is changed or a Control with HDMIcompatible component is played.
08 Control with HDMI function 10 Select the ‘Speaker B Link’ setting you want. Setting the PQLS function When ON is selected here, the speaker terminals that are played (the SPEAKERS button setting) can be changed automatically when HDMI OUT 1 and HDMI OUT 2 are switched. This only works when 7.1ch + Speaker B or 5.1ch + SP-B Bi-Amp is selected for the Speaker System setting.
08 Control with HDMI function Stream Smoother Link Using the Control with HDMI function, the receiver automatically detects whether a compressed video file is being played on the player, and if so automatically activates the Stream Smoother function. To activate the Stream Smoother Link function, make the setting below. 1 Set the HDMI Setup’s Control to ON, and set the Control Mode setting to ON. See HDMI Setup on page 71. 2 Set the STREAM (Stream Smoother) setting to AUTO.
Using other functions Setting the Audio options............................................................................................................. 75 Setting the Video options.............................................................................................................. 77 Switching the speaker terminals................................................................................................... 79 Using the MULTI-ZONE controls..................................................
09 Using other functions Setting the Audio options There are a number of additional sound settings you can make using the AUDIO PARAMETER menu. The defaults, if not stated, are listed in bold. Important Setting What it does Option(s) OFF S.RTRV (Auto Sound Retriever) With the Auto Sound Retriever function, DSP processing is used to compensate for the loss of audio data upon compression, improving the sound’s sense of density and modulation.
09 Using other functions Setting What it does Option(s) Setting What it does Option(s) ON V.HEIGHT (Virtual Height) When you’re not using front height speakers, selecting this mode allows you to hear a virtual front height channel through your front speakers. OFF Loud Mgmt (Loudness Management) Adjusts the level of dynamic range for movie soundtracks optimized for Dolby TrueHD (you may need to use this feature when listening to surround sound at low volumes).
09 Using other functions m ! This can be set when MANUAL is selected for V.SPs. ! You can’t use the Virtual Height mode when the headphones are connected to this receiver or when any of the stereo, Front Stage Surround Advance, Sound Retriever Air or Stream Direct modes is selected. ! You can only use the Virtual Height mode if the surround speakers are on and the FH setting is set to NO. It can also not be used when playing signals containing actual front height channel information.
09 Setting Using other functions What it does Option(s) Setting BNR c What it does Option(s) Adjusts the red/green balance. Reduces block noise (block-shaped distortion generated upon MPEG compression) in the picture. c c 0 to +8 d Default: 0 HUE 0 c –6 to +6 d Default: 0 d (The image is only an example for checking the effect.) Reduces mosquito noise (distortion generated at the contours of the picture upon MPEG compression) in the picture.
09 Using other functions Switching the speaker terminals Notes ! When 7.1ch + Speaker B or 5.1ch + SP-B Bi-Amp is selected for the Speaker System setting (page 99) and Speaker B Link (HDMI Setup on page 71) is set to “ON”, the setting of the speaker terminals that are played changes automatically when HDMI OUT 1 and HDMI OUT 2 are switched. For details, see Switching the HDMI output on page 81. ! The subwoofer output depends on the settings you made in Manual speaker setup on page 99.
09 Using other functions ZONE 2 remote controls Making an audio or a video recording Press the remote control’s ZONE 2 to operate the corresponding zone. The following table shows the possible ZONE 2 remote controls: Button(s) What it does u Switches on/off power in the sub zone. INPUT SELECT Use to select the input function in the sub zone. Input function buttons Use to select the input function directly (this may not work for some functions) in the sub zone.
09 Using other functions About the Speaker B Link function Using the sleep timer When 7.1ch + Speaker B or 5.1ch + SP-B Bi-Amp is selected for the Speaker System setting (page 99) and Speaker B Link (HDMI Setup on page 71) is set to “ON”, the setting of the speaker terminals that are played changes automatically when HDMI OUT 1 and HDMI OUT 2 are switched. The setting switches as follows. ! OUT 1+2 – Switches to SP: A+B ON.
09 Using other functions Setting Resetting the system Default Phase Control Use this procedure to reset all the receiver’s settings to the factory default. Use the front panel controls to do this. Set MULTI-ZONE to MULTI ZONE OFF. ! Disconnect the iPod and USB memory device from the receiver beforehand. ! Set the Control with HDMI to OFF (see HDMI Setup on page 71).
Controlling the rest of your system About the Remote Setup menu..................................................................................................... 84 Operating multiple receivers......................................................................................................... 84 Setting the remote to control other components....................................................................... 84 Selecting preset codes directly.......................................................
10 Controlling the rest of your system About the Remote Setup menu Setting the remote to control other components The Remote Setup mode is set by pressing the number button while pressing RCU SETUP. The different items on the Remote Setup menu are described below. For their setting procedures, refer to the explanations for the respective items. Most components can be assigned to one of the input function buttons (such as DVD or CD) using the component’s manufacturer preset code stored in the remote.
10 4 Controlling the rest of your system 3 Point the two remote controls towards each other, then press the button that will be doing the learning on this receiver’s remote control. Repeat steps 2 through 3 for the other components you want to control. To try out the remote control, switch the component on or off (into standby) by pressing u SOURCE. If it doesn’t seem to work, select the next code from the list (if there is one). 5 The LED flashes once, then stops flashing, remaining lit.
10 Controlling the rest of your system This operation erases all the operational settings of other devices that have been programmed in one input function, and restores the factory default. This function is handy for erasing all data programmed for devices no longer being used. ! ‘3’ (eco mode) – The backlight is turned on and off with the light button. After it lights, it turns off automatically if no operation is performed for 5 seconds.
10 Controlling the rest of your system Resetting the remote control settings Controlling components Use this procedure to reset all the remote control’s settings to the factory default. ! When preset codes are set, all the signals learned in the input function buttons are cleared. This function is convenient when you want to reset some but not all of input function buttons.
10 Controlling the rest of your system TV and Audio/Video components Audio/Video components Button(s) LD CD/CD-R/SACD MD/DAT TAPE u SOURCE POWER ON/OFF POWER ON/OFF POWER ON/OFF POWER ON/OFF POWER ON/ OFF Number buttons numerics numerics numerics — numerics numerics !/CLR +10 >10/CLEAR CLEAR CLEAR ENTER (CLASS) ENTER DISC/ENTER OPEN/CLOSE ENTER TOP MENU — — MSc — LEGATO LINK — MSd Button(s) TV TV (Monitor) BD/DVD HDD/BDR/ DVR VCR SAT/CATV u SOURCE PO
10 Controlling the rest of your system TV (Projector) Button(s) TV (Projector) u SOURCE POWER ON 1 MOVIE 2 STANDARD 3 DYNAMIC 4 USER1 5 USER2 6 USER3 7 COLOR+ 8 SHARP+ 9 GAMMA 0 COLOR– !/CLR SHARP– ENTER (CLASS) COLOR TEMP EXIT INFO i/j/k/l ENTER i/j/k/l ENTER TEST HIDE MENU m HDMI1 d HDMI2 n COMP.
The Advanced MCACC menu Making receiver settings from the Advanced MCACC menu..................................................... 91 Automatic MCACC (Expert)........................................................................................................... 91 Manual MCACC setup.................................................................................................................... 93 Checking MCACC Data......................................................................................
11 The Advanced MCACC menu 2 Making receiver settings from the Advanced MCACC menu The Advanced MCACC (Multi Channel ACoustic Calibration) system was developed in Pioneer’s laboratories with the aim of making it possible for home users to perform adjustments of the same level as in a studio easily and with high precision.
11 3 The Advanced MCACC menu Connect the microphone to the MCACC SETUP MIC jack on the front panel. 8 Make sure there are no obstacles between the speakers and the microphone. ZONE 2 ON/OFF MULTI-ZONE CONTROL SPEAKERS iPod iPhone iPad DIRECT CONTROL AUTO/ALC/ DIRECT HOME THX BAND TUNER EDIT ZONE 3 ON/OFF HDZONE ON/OFF PHONES MCACC SETUP MIC with USB 5V 2.1 A 9 The Auto MCACC Setup procedure is completed and the Advanced MCACC menu reappears automatically. HDMI 5 INPUT/ 0.
11 The Advanced MCACC menu 2 Manual MCACC setup Adjust the level of the left channel. This will be the reference speaker level, so you may want to keep the level around 0.0dB so that you’ll have plenty of room to adjust the other speaker levels. ! After pressing ENTER, test tones will be output. You can use the settings in the Manual MCACC setup menu to make detailed adjustments when you’re more familiar with the system.
11 The Advanced MCACC menu Standing Wave Acoustic Calibration EQ Professional ! Default setting: ON/ATT 0.0dB (all filters) Acoustic standing waves occur when, under certain conditions, sound waves from your speaker system resonate mutually with sound waves reflected off the walls in your listening area. This can have a negative effect on the overall sound, especially at certain lower frequencies.
11 3 The Advanced MCACC menu If you selected ‘Reverb Measurement’, select EQ ON or EQ OFF, and then START. Precision Distance The following options determine how the reverb characteristics of your listening area are displayed in Reverb View: ! EQ OFF – You will see the reverb characteristics of your listening area without the equalization performed by this receiver (before calibration).
11 The Advanced MCACC menu Checking MCACC Data Speaker Distance At the procedure of Automatically conducting optimum sound tuning (Full Auto MCACC) on page 45, the procedure of Automatic MCACC (Expert) on page 91 or after fine-adjusting at Manual MCACC setup on page 93, you can check your calibrated settings using the GUI screen. Use this to display the distance from the different channels to the listening position. See Speaker Distance on page 101 for more on this.
11 The Advanced MCACC menu 4 Data Management This system allows you to store up to six MCACC presets, allowing you to calibrate your system for different listening positions (or frequency adjustments for the same listening position). This is useful for alternate settings to match the kind of source you’re listening to and where you’re sitting (for example, watching movies from a sofa, or playing a video game close to the TV).
The System Setup and Other Setup menus Making receiver settings from the System Setup menu............................................................. 99 Manual speaker setup.................................................................................................................... 99 Network Setup menu...................................................................................................................102 Checking the Network Information................................................
12 The System Setup and Other Setup menus ! X-Curve – Adjusts the tonal balance of your speaker system for movie soundtracks (page 101). ! THX Audio Setting – Specifies whether you are using a THX speaker setup (page 101). Making receiver settings from the System Setup menu The following section describes how to change the speaker-related settings manually and make various other settings (input selection, OSD language selection, etc.).
12 The System Setup and Other Setup menus Using Multi-ZONE Music Multi-ZONE Music can be used to play the same sound in the MAIN ZONE, ZONE 2 and ZONE 3, for example for home parties. Normally set Speaker System to 5.1ch + ZONE 2+3 for multi-zone/multi-source playback, then switch it to Multi-ZONE Music when having a home party. When this is done, the sound of the input function selected for the MAIN ZONE is played in all zones (the MAIN ZONE, ZONE 2 and ZONE 3).
12 The System Setup and Other Setup menus Speaker Distance THX Audio Setting For good sound depth and separation from your system, you need to specify the distance of your speakers from the listening position. The receiver can then add the proper delay needed for effective surround sound. This menu allows the user to adjust various THX features including Loudness Plus, SBch processing, THX Ultra2 Subwoofer (on/off), Boundary Gain Compensation, and Re-Equalization.
12 The System Setup and Other Setup menus Proxy Hostname/Proxy Port Network Setup menu This setting is required when you connect this receiver to the Internet via a proxy server. Enter the IP address of your proxy server in the ‘Proxy Hostname’ field. Also, enter the port number of your proxy server in the ‘Proxy Port’ field. Make the settings for connecting the receiver to the Internet and using the network functions. 1 Press on the remote control, then press HOME MENU.
12 The System Setup and Other Setup menus Parental Lock The Other Setup menu Set restrictions for using Internet services. Also set the password accompanying the usage restrictions. ! Upon shipment from the factory, the password is set to “0000”. The Other Setup menu is where you can make customized settings to reflect how you are using the receiver. 1 Important When the INTERNET RADIO or FAVORITES input is selected, the setting made here cannot be reflected.
12 The System Setup and Other Setup menus ! If an update file is provided on the Pioneer website, download it onto your computer. When downloading an update file from the Pioneer website onto your computer, the file will be in ZIP format. Unzip the ZIP file before saving it on the USB memory device. If there are any old downloaded files or downloaded files for other models on the USB memory device, delete them. — http://www.pioneer.com.sg (for Southeast Asia) — http://www.pioneer.com.
12 The System Setup and Other Setup menus 9 ZONE Setup The volume setting and tone for the sub zones that can be used with this receiver can be changed and adjusted here. CAUTION 10 Adjust Lch Level and Rch Level. ! Note that when Volume Level is set to 0 dB Fixed, the audio output from the AUDIO ZONE 2 OUT terminals is set to the maximum. Also, depending on the volume setting on the connected amplifier, large volumes may be produced even when Volume Level is set to –40 dB Fixed.
12 The System Setup and Other Setup menus Play ZONE Setup MHL Setup Select the zone for playing the audio contents of devices in the home network when using in the DMR mode. ! For playable DLNA-compatible network devices, see page 65. 1 Select ‘Play ZONE Setup’ from the Other Setup menu. Select whether or not to switch the input automatically to the MHL input when an MHL-compatible device is connected. ! Default setting: ON 2 Select the zone in which you want to play the audio contents.
12 The System Setup and Other Setup menus Making network settings using Safari Using Safari to set a friendly name 1 1 Launch Safari on your computer. Launch Safari on your computer. 2 Press Bookmark icon. Click Bonjour list (a), and then select this receiver’s name (Friendly Name) (b) in Bookmark. 2 Press Bookmark icon. Click Bonjour list (a), and then select this receiver’s name (Friendly Name) (b) in Bookmark.
12 The System Setup and Other Setup menus 6 Using Safari to update the firmware 1 The firmware upload status screen is displayed. “The upload process finished successfully.” will be shown when the update is completed. Once updating is completed, the receiver’s power automatically turns off. Launch Safari on your computer. 2 Press Bookmark icon. Click Bonjour list (a), and then select this receiver’s name (Friendly Name) (b) in Bookmark.
FAQ Troubleshooting...........................................................................................................................110 Power.............................................................................................................................................110 No sound.......................................................................................................................................110 Other audio problems.................................................
13 FAQ Symptoms Troubleshooting Remedies AMP ERR blinks in the display, then The receiver may have a serious problem. Do not try switching the receiver on. Unplug the the power automatically switches off. receiver from the wall and call a Pioneer authorized independent service company. The ADVANCED MCACC blinks and the power does not turn on. Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below.
13 FAQ Symptoms Remedies No sound from front height or front wide speakers. Check that the front height or front wide speakers are set to LARGE or SMALL, and the surround speakers are not set to NO (see Speaker Setting on page 100). Other audio problems Check the speaker connections (see Connecting the speakers on page 21). No sound from subwoofer. Check that the subwoofer is connected properly, switched on and the volume turned up.
13 FAQ Symptoms Remedies The maximum volume available (shown in the front panel display) is lower than the +12dB maximum. Check that the Volume Limit is set to OFF (see Volume Setup on page 104). Certain listening modes or HOME MENU items cannot be selected. When Operation Mode is set to Basic, the Pioneer-recommended settings are made and not all of the functions can be used. To use all of the functions without restrictions, set Operation Mode to Expert (see Operation Mode Setup on page 47).
13 FAQ Settings Symptoms Remedies The Auto MCACC Setup continually shows an error. The ambient noise level may be too high. Keep the noise level in the room as low as possible (see also Problems when using the Auto MCACC Setup on page 46). If the noise level cannot be kept low enough, you will have to set up the surround sound manually (page 99). To use a 5.1-channel speaker set, use the surround speakers for the surround channel, not the surround back channel.
13 FAQ Symptoms Remedies When playing a disc with the listening mode set to Auto Surround or ALC, 2 Pro Logic II or DTS Neo:X appear on the receiver. Make sure that the receiver is set to AUTO or DIGITAL (see Choosing the input signal on page 61). During playback of DVD-Audio, the display shows PCM. This will occur when playing DVD-Audio material over the HDMI connection. This is not a malfunction.
13 FAQ Symptoms Remedies Synchronized operation not possible using Control with HDMI function. Check the HDMI connections. AVNavigator The cable may be damaged. Symptoms Causes Remedies Select ON for the Control Mode with HDMI setting (see HDMI Setup on page 71). AVNavigator cannot be installed. An error message may appear if there are not enough system resources available. Restart the computer and start installing with no other applications running.
13 FAQ USB interface Symptoms Network Causes The folders/files stored on a The folders/files are currently stored USB memory device are not in a region other than the FAT (File displayed. Allocation Table) region. A USB memory device is not recognized. Remedies Symptoms Causes Remedies Store the folders/files in the FAT region. Cannot access the network. The LAN cable is not firmly connected. Firmly connect the LAN cable (page 39). The number of levels in a folder is more than 9.
13 FAQ Symptoms Causes Remedies Symptoms Cannot access the component connected to the network. The component connected to the network is not properly set. If the client is automatically authorized, you need to enter the corresponding information again. Check whether the connection status is set to “Do not authorize”. Change Play ZONE Setup to MAIN (page 106). There are no playable audio files on the component connected to the network.
13 FAQ Try making the wireless LAN converter’s advanced settings. ! The wireless LAN converter can be connected to a computer to make the advanced wireless LAN settings. For details, see the CD-ROM included for the wireless LAN converter. Check the settings of the wireless LAN router, etc., then change the settings of the wireless LAN converter. Note, however, that making the advanced wireless LAN settings will not necessarily improve the wireless LAN environment. Be careful when changing the settings.
Additional information Surround sound formats..............................................................................................................120 About THX.....................................................................................................................................120 About HDMI..................................................................................................................................121 HTC Connect....................................................
14 Additional information Surround sound formats About THX Below is a brief description of the main surround sound formats you’ll find on BDs, DVDs, satellite, cable and terrestrial broadcasts, and video cassettes. The THX technologies are explained below. See http://www.thx.com for more detailed information. Dolby The Dolby technologies are explained below. See http://www.dolby.com for more detailed information. THX, the THX logo Ultra2 Plus and Select2 Plus are trademarks of THX Ltd.
14 Additional information THX Ultra2 Plus About HDMI Before any home theatre component can be THX Ultra2 Plus certified, it must incorporate all the features above and also pass a rigorous series of quality and performance tests. Only then can a product feature the THX Ultra2 Plus logo, which is your guarantee that the Home Theatre products you purchase will give you superb performance for many years to come.
14 Additional information About iPod MHL AirPlay works with iPhone, iPad, and iPod touch with iOS 4.3.3 or later, Mac with OS X Mountain Lion, and Mac and PC with iTunes 10.2.2 or later. MHL, the MHL Logo, and Mobile High-Definition Link are trademarks or registered trademarks of MHL, LLC in the United States and other countries.
14 Additional information Auto Surround, ALC and Stream Direct with different input signal formats Speaker Setting Guide In order to achieve an even better surround effect, it is important to accurately position the speakers and make their volume and tone characteristics uniform so as to finely focus the multi-channel sound. The three major elements in positioning the speakers are distance, angle and orientation (the direction in which the speakers are pointing).
14 Additional information If the subwoofer must be installed near a wall, place it at an angle so that it is not parallel to the wall surface. This can help reduce any sympathetic vibrations, but depending on the shape of the room this could result in standing waves. However, even if standing waves are generated, their influence on the sound quality can be prevented using the Auto MCACC’s standing wave control function (page 94).
14 Additional information Important information regarding the HDMI connection Pioneer Authorized Distributors There are cases where you may not be able to route HDMI signals through this receiver (this depends on the HDMI-equipped component you are connecting-check with the manufacturer for HDMI compatibility information). If you aren’t receiving HDMI signals properly through this receiver (from your component), please try one of the following configurations when connecting up. REP.
14 Additional information THX Glossary The THX technologies are explained below. See http://www.thx.com for more detailed information. THX Cinema Audio formats/Decoding A mode for playing in a home theater environment the sound tracks of theater movies that have been recorded and edited for playback in large spaces such as movie theaters. Dolby The Dolby technologies are explained below. See http://www.dolby.com for more detailed information.
14 Additional information Network function Virtual Height When you’re not using front height speakers, selecting this mode allows you to hear a virtual front height channel through your front speakers. AirPlay AirPlay works with iPhone, iPad, and iPod touch with iOS 4.3.3 or later, Mac with OS X Mountain Lion, and Mac and PC with iTunes 10.2.2 or later. For more information, see the Apple website (http://www.apple.com).
14 Additional information Router USB-DAC A device for relaying data flowing on a network to another network. In homes, routers often also function as DHCP servers. Products with built-in wireless LAN access points are called “wireless LAN routers”. By using a USB cable (Type A Male to Type B Male, sold separately) to connect this unit’s USB-DAC IN terminal to the USB port on a PC, this unit can be used as a D/A converter. DHCP Abbreviation of Dynamic Host Configuration Protocol.
14 Additional information Dialog Enhancement Features index See Setting the Audio options on page 75. Internet radio Operation Mode See Operation Mode Setup on page 47. See Listening to Internet radio stations on page 66. AVNavigator for Windows, AVNavigator for Mac, AVNavigator for iPad vTuner See About using AVNavigator (included CD-ROM) on page 9. See Listening to Internet radio stations on page 66. Audio Scaler DLNA See Setting the Audio options on page 75.
14 Additional information Miscellaneous Specifications Amplifier section Multi channel simultaneous power output (1 kHz, 1 %, 8 W) 9 ch total............................................................................................................... 850 W (SC-LX87)/810 W (SC-LX77) Maximum power output (1 kHz, THD 10 %, 4 W, 1 ch Driven)............. 370 W (SC-LX87)/350 W (SC-LX77) per channel Rated power output (1 kHz, 4 W, 1 %, 1 ch Driven)..............................
14 Additional information Elman 0144 Elta 0142, 0154, 0228 Emerson 0125, 0138, 0155 Epson 0216 Erres 0149, 0152, 0155 ESC 0229 Etron 0142 Eurofeel 0229, 0140 Euroline 0152 Euroman 0125, 0140, 0141, 0149, 0155, 0228, 0229 Europhon 0141, 0144, 0149, 0155, 0228, 0229 Expert 0156 Exquisit 0155 Fenner 0142, 0154 Ferguson 0148, 0152, 0153, 0157 Fidelity 0141, 0145, 0155, 0228 Filsai 0229 Finlandia 0145 Finlux 0132, 0138, 0141, 0144, 0149, 0152, 0155, 0229 Firstline 0141, 0142, 0149, 0154, 0155, 0228, 0229 Fishe
14 Naonis 0145 NEC 0147, 0229 Neckermann 0125, 0138, 0141, 0145, 0149, 0150, 0152, 0155, 0229 NEI 0149, 0152, 0155 Neufunk 0154, 0155 New Tech 0142, 0149, 0154, 0155, 0229 New World 0143 Nicamagic 0141, 0228 Nikkai 0140, 0141, 0143, 0149, 0152, 0154, 0155, 0228, 0229 Nobliko 0132, 0141, 0144, 0228 Nokia 0146 Nordic 0229 Nordmende 0138, 0146, 0148, 0149 Nordvision 0152 Novatronic 0155 Oceanic 0146, 0156 Okano 0125, 0150, 0155 ONCEAS 0141 Opera 0155 Orbit 0149, 0155 Orion 0142, 0149, 0152, 0154, 0155, 0194 Or
14 Supervision 2181 Synn 2181 Tatung 2130, 2188 TCM 2097 Teac 2162, 2177, 2181 Tec 2186 Technika 2188 Additional information Telefunken 2183 Tensai 2188 Tevion 2097, 2181, 2187 Thomson 2098, 2112, 2155, 2159 Tokai 2178, 2186 Toshiba 2102, 2156, 2168, 2169, 2172 TRANScontinents 2189 Trio 2188 TruVision 2185 Wharfedale 2180, 2181 Xbox 2098 Xlogic 2181, 2188 XMS 2188 Yamada 2189 Yamaha 2106 Yamakawa 2178, 2189 Yukai 2101, 2147 Interbuy 1038, 1050 Interfunk 1039 Intervision 1033, 1051 Irradio 1038, 1040, 1
14 Additional information ID Digital 6241 ILLUSION sat 6247 Imperial 6222, 6216, 6223, 6238, 6232 Ingelen 6213, 6261 Inno Hit 6228 International 6256 Interstar 6196 Intervision 6255 Inves 6268 iotronic 6244 ITT Nokia 6176, 6207 Jaeger 6238 K-SAT 6180 Kamm 6180 Kaon 6251 KaTelco 6267 Kathrein 6177, 6214, 6213, 6262, 6200, 6180, 6179, 6272, 6183 Kendo 6252 Kenwood 6220 Key West 6256 Kiton 6213 KR 6200 Kreiling 6213, 6194, 6228 Kreiselmeyer 6177 Kyostar 6200 L&S Electronic 6256, 6238 Labgear 6195 LaSAT 6177,
14 Starland 6180 Starlite 6214 Stream 6212 Stream System 6251 Strong 6220, 6228, 6256, 6200, 6180, 6245, 6217, 6239 Sumin 6199 Sunny 6251 Sunsat 6180 Sunstar 6174, 6256 SuperMax 6193 Supratech 6244 Systec 6238 Tantec 6176 Targa 6191 Tatung 6176 TBoston 6227, 6245 Tecatel 6233 Technical 6228 Technika 6217, 6232, 6218 TechniSat 6213, 6261, 6176, 6236, 6215, 6222, 6216, 6223 Technomate 6250 Technosat 6193 Technosonic 6254, 6232 Technotrend 6232 Technowelt 6256, 6255 Additional information Techwood 6213, 6217
PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CANADA, INC. 340 Ferrier Street, Unit 2, Markham, Ontario L3R 2Z5, Canada TEL: 1-877-283-5901, 905-479-4411 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11 PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
